User`s manual

NPort S8000 Series Initial IP Address Configuration
3-5
5. Press N or use the arrow keys to select Network, and then press ENTER.
6. Use the arrow keys to move the cursor to IP address. Use the DELETE, BACKSPACE, or SPACE keys to
erase the current IP address, and then type in the new IP address and press ENTER. Note that if you are
using a dynamic IP configuration (BOOTP, SHCP, etc.), you will need to go to the Auto IP configuration
field and press ENTER to select the appropriate configuration.
7. Press ESC twice to return to previous page. Select Activate and Press “Y” to confirm the modification.