User`s manual

NPort S8000 Series Switch Featured Functions
6-69
Now active Indicate the in used communication protocol. It may be Turbo Ring, Turbo Ring V2,
RSTP, or none.
Root/Not root Available when Redundancy protocol is set to RSTP mode.
Indicate NPort S8000 is in the Root of the Spanning Tree.
(The root is determined automatically).
Port 1 / Port 2
Port 3 / Port 4
Port 5
Indicates the current Spanning Tree status of these ports.
“Forwarding” for normal transmission
“Blocking” to block transmission.
Turbo Ring
Now active Indicate the in used communication protocol. It may be Turbo Ring,
Turbo Ring V2, RSTP, or none.
Master/Slave Indicate NPort S8000 is in the Master mode or Slave mode of the Turbo
Ring.
Redundant Ports Status Link down No connection
Blocked This port is connected to a backup path and the path is
blocked
Forwarding Normal transmission
Learning Learning
Ring Coupling Ports Status Enable or disable
Coupling Port Indicate which port is used to be coupling port (port 1 to port 5). Available
when Ring Coupling in communication redundancy setting page is
enabled
Coupling Control Port
Indicate which port is used to be coupling control port (port 1 to port 5).
Available when Ring Coupling in communication redundancy setting page
is enabled
Turbo Ring 2