User`s manual

NPort S8000 Series Switch Featured Functions
6-68
Setting Description
Trunk Group Displays the Trunk Type and Trunk Group.
Member Port Display which member ports belong to the trunk group.
Status Success means port trunking is working properly.
Fail means port trunking is not working properly.
Standby means port trunking is working as a standby port. When there are more
than eight ports trunked as a trunking group, the 9th port will be the standby port.
VLAN Table
In the 802.1Q VLAN table, you can review the VLAN groups that were created, Joined Access Ports, and Trunk
Ports. In the Port-based VLAN table, you can review the VLAN group and Joined port.
NOTE
The physical network can have a
maximum of 64 VLAN settings.
Communication Redundancy Status
This page shows the status of communication redundancy.
RSTP
Explanation of “Current Status” Items
Now Active
Shows which communication protocol is in use: Turbo Ring, Turbo Ring V2, RSTP
Ring 1/2—Status
Shows Healthy if the ring is operating normally, and shows Break if the ring’s backup link is active.
Ring 1/2—Master/Slave
Indicates whether or not this NPort S8000 is the Master of the Turbo Ring. (This field appears only when
selected to operate in Turbo Ring or Turbo Ring V2 mode.)