User`s manual

NPort S8000 Series Switch Featured Functions
6-65
Event Log
Bootup This field shows how many times the NPort S8000 has been rebooted or cold started.
Date The date is updated based on how the current date is set in the “Basic Setting” page.
Time The time is updated based on how the current time is set in the “Basic Setting” page.
System Startup Time The system startup time related to this event.
Events Events that have occurred.
NOTE
The following events will be recorded into the NPort S8000’s Event Log table:
1. Cold start
2. Warm start
3. Configuration change activated
4. Power 1/2 transition (Off ( On), Power 1/2 transition (On ( Off)
5. Authentication fail
6. Topology changed
7. Master setting is mismatched
8. DI 1/2 transition (Off ( On), DI 1/2 transition (On ( Off)
9. Port traffic overload
10. dot1x Auth Fail
11. Port link off / on
Ethernet Status
MAC Address List
This section explains the information provided by the NPort S8000’s MAC address table.
The MAC Address table can be configured to display the following NPort S8000 MAC address groups.
ALL Select this item to show all NPort S8000 MAC addresses
ALL Learned Select this item to show all NPort S8000 Learned MAC addresses