User`s manual

NPort S8000 Series Switch Featured Functions
6-56
Maintenance
Console Settings
Config
HTTP console HTTP console enable/disable
HTTPS console HTTPS console enable/disable
Telnet console Telnet console enable/disable
SSH console SSH console enable/disable
Reset button Always Enable
Reset button disable after 60 sec uptime
Auto refresh time Monitor page refresh time
Ping
The Ping function uses the ping command to give users a simple but powerful tool for troubleshooting network
problems. The function’s most unique feature is that even though the ping command is entered from the user’s
PC keyboard, the actual ping command originates from NPort S8000 itself. In this way, the user can essentially
control the NPort S8000 and send ping commands out through its ports.
To use the Ping function, type in the desired IP address, and then press Enter from the Console utility, or click
Ping when using the Web Browser interface.