User`s manual

NPort S8000 Series Switch Featured Functions
6-55
Local Log Keep the log into the flash of NPort S8000 up to 512 items.
Remote Log Keep the log into the remote defined Log Server.
You will need to assign a remote Log Server in the System Management / Misc.
Network Settings / Remote Log Settings if remote log is checked.
System
System Cold Start NPort S8000 cold start.
System Warm Start NPort S8000 warm start.
Power Transition The NPort S8000 is powered up or down.
DI On/Off Digital Input 1 is triggered
Network
DHCP/BOOTP/Get IP/Renew IP of the NPort S8000 is refreshed.
Mail Fail Failed to deliver the E-mail.
NTP Connect Fail The NPot S8455I-MM-SC failed to connect to the NTP Server.
IP Conflict There is an IP conflict on the local network.
Network Link Down/UP LAN 1 Link is down.
Communication Redundancy
Topology Changed/Master
Mismatched
When the status of Ring is changed or Master device is mismatched
Config
Authentication Fail
IP Changed Static IP address was changed.
Config Changed The NPort S8000’s configuration was changed.
Firmware Upgrade Firmware was upgraded.
Config Import Config was impoted.
Config Export Config was expoted.
OpMode
Connect Op Mode is in used
Disconnect Op Mode switched from in use to disconnect.
Restart Serial port was restarted.