User`s manual

NPort S8000 Series Introduction
1-5
Ethernet Switch Specifications
Ethernet Interface
Standards:
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X) and 100Base FX
IEEE 802.3x for Flow Con
trol
IEEE 802.1D for Spanning Tree Protocol
IEEE 802.1w for Rapid STP
IEEE 802.1Q for VLAN Tagging
IEEE 802.1p for Class of Service
IEEE 802.1x for Authentication
IEEE 802.3ad for Port Trunk with LACP
Network Protocols:
ICMP, IP, TCP, UDP, ARP, Telnet, DNS, HTTP, SMTP, SNTP, IGMPv1/v2 device, GVRP,
SNMPv1/v2c/v3, DHCP Server/Client, DHCP Option 82, BootP, TFTP, SNTP, SMTP, RARP, GMRP, LACP, RMON
MIB:
MIB-II, Ethernet-Like MIB, P-BRIDGE MIB, Q-
BRIDGE MIB, Bridge MIB, RSTP MIB, RMON MIB Group 1,
2, 3, 9
Fl
ow Control: IEEE 802.3x flow control, back pressure flow control interface
Optical Fiber Interface
Distance:
• Multi
-mode: 0 to 4 km, 1310 nm (62.5/125 μm, 500 MHz*km)
• Single-mode: 0 to 40 km, 1310 nm (9/125 μm, 3.5 PS/(nm*km))
Min. TX Output:
• Mu
lti-mode: -20 dBm
• Single
-mode: - 5 dBm
Max. TX Output:
• Multi
-mode: -14 dBm
• Single
-mode: 0 dBm
Sensitivity:
• Multi
-mode: -34 to -30 dBm
• Single
-mode: -36 to -32 dBm
Switch Properties
Priority Queues:
4
Max. Number of Available VLANs:
64
VLA
N ID Range: VID 1 to 4094
IGMP Groups:
256
Switch Interface
RJ45 Ports: 10/100BaseT(X) auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connection
DIP Switches:
Turbo Ring, Master, Coupler, Reserve
Alarm Contact:
2 relay outputs with current carrying capacity of 1A @ 24 VDC