User`s manual

SDK 2 Programmer’s Guide Developing User Applications
3-12
Ethernet Port
IP Address xxx.xxx.xxx.xxx
Available with multi-selection
When multiple target NPort PCGs are
selected, they will all be configured with
the same IP address.
Netmask xxx.xxx.xxx.xxx
Available with multi-selection
Define a range of IPs by inputting Start
and End values. These IP addresses will be
assigned in sequence to selected NPort, in
order of their appearance in the Manager
window.
Gateway xxx.xxx.xxx.xxx User defined IP address
Static IP
Use Pre-defined IP address in “IP
Address”
DHCP
Use DHCP protocol requests for IP
address
DHCP+BOOTP
The DHCP Server assigns the IP address,
Netmask, Gateway, DNS, and Time
Server. If the DHCP Server does not
respond, the BOOTP Server assigns the IP
address.
IP Config
BOOTP
Use BOOTP protocol requests for IP
address