User`s manual

SDK 2 Programmer’s Guide Developing User Applications
3-9
If the search is successful, the Model Name, Serial No., Module Name, AP ID, MAC Address,
IP Address, Subnet Mask, and OP Mode of the NPort will be displayed in the SDK Manager
window.
Locate Gateway
The Locate Gateway function is used to find the physical location of a PCG unit when there are
multiple NPort PCGs on the same network. To use this function, first click on the device you
would like to locate to highlight the device’s information, and then select Locate Gateway under
the Search menu, or click on the Locate Gateway toolbar icon.
If the Locate Result is OK, then the Ready light on the located NPort PCG unit will blink steadily,
and the buzzer will beep once per second, allowing you to identify the NPort PCG and IP Address.
Click on OK to cause the NPort PCG unit’s Ready light to stop blinking.