User`s manual

SDK 2 Programmer’s Guide Developing User Applications
3-8
NOTE
The default IP address of an NPort PCG 5200-P series product is 192.168.127.254, with subnet
mask set to 255.255.255.0.
Search by IP
To access this function, select Search by IP under the Search menu, or click on the Search by IP
toolbar icon.
When the Search by IP Address window opens, type the IP address in the text input box, and
then click OK.
The Search by IP window will display the progress of the search.
NOTE
If you receive the Specified device not found error message, as shown above, and the NPort PCG is
located on the same LAN as the host, try using Broadcast Search, or change the host computer’s IP
address and/or Netmask so that the computer and NPort PCG are on the same subnet.