Installation guide

VPort 2100 Series Quick Installation Guide
3-4
Assigning an IP Address to the VPort
2100 Series Video Server
In a DHCP Server Networking Environment
The VPort’s IP address is assigned by a DHCP server when the VPort is
connected to a DHCP server network. In this case, use the DHCP Server’s
IP address table or the MOXA VPort Installation Wizard utility to
determine the IP address that was assigned by the DHCP Server.
Note
After powering on the VPort, wait a few seconds for the POST
(Power On Self Test) to run. The IP address will be assigned when
the CONNECT LED is lit.
Using the VPort Installation Wizard
1. Install the VPort Installation Wizard, which is located on the Software
CD.
2. Run the VPort Installation Wizard, which will automatically search for
VPort products connected to the same LAN. You can also click the
Search button on the VPort Installation Wizard window to initiate a
new search.
3. When the wizard finishes searching, the MAC address, IP address,