Installation guide

VPort 2100 Series Quick Installation Guide
3-2
Note
To learn how to use a modem dial-up connection or null modem
connection, please refer to the User’s Manual on the software CD.
VPort 2140
Front Panel
Rear Panel
Take the following steps before powering on the VPort 2140 video server:
1. Connect your camera’s video output to the BNC video input.
2. Connect I/O devices (such as sensors or alarms) to VPort’s GPIO
terminal block.
3. Connect the hub or switch on the LAN to the VPort’s 10/100 Mbps
Ethernet port.
4. Connect VPort’s COM port to your camera’s COM port if you are
using a PTZ Camera.
5. Connect the power supply.