MOXA VPort 2110/2140/2141 Video Server Quick Installation Guide Third Edition, July 2006 MOXA Networking Co., Ltd. Tel: +886-2-2910-1230 Fax: +886-2-2910-1231 www.moxa.com support@moxanet.com (Worldwide) support@moxa.com (The Americas) NOTE: This Quick Installation Guide describes basic installation procedures for VPort 2110/2140/2141 Video Servers. Please refer to the User’s Manual on the documentation CD for more detailed instructions about using these products.
MOXA VPort 2110/2140/2141 Video Server Quick Installation Guide The software described in this manual is furnished under a license agreement and may be used only in accordance with the terms of that agreement. Copyright Notice Copyright © 2006 MOXA Networking Co., Ltd. All rights reserved. Reproduction without permission is prohibited. Trademarks MOXA is a registered trademark of The Moxa Group. All other trademarks or registered marks in this manual belong to their respective manufacturers.
1 Chapter 1 Package Checklist VPort 2110 Video Server Standard Accessories y 1 VPort 2110 Video Server y Power adapter ¾ Input: 100 to 240 VAC ¾ Output: +12 VDC, 1.5A (UK Standard: +12 VDC, 1.
VPort 2110/2140/2141 Quick Installation Guide VPort 2140 Video Server Standard Accessories y 1 VPort 2140 Video Server y Power adapter ¾ Input: 100 to 240 VAC ¾ Output: +12 VDC, 1.5A (UK Standard: +12 VDC, 1.25A) y PTZ Camera Control Cable y Null Modem Cable (Female DB9 to Female DB9) y I/O Terminal Block Kit × 2 for ¾ 4 DI, 2 Relay Outputs ¾ 1 RS-485 COM port ¾ 1 12 VDC Power Output (Max. 500 mA) ¾ 1 External Power Input (12 VDC, Min. 1.
2 Chapter 2 Product Description Panel Layout VPort 2110 Video Server Front Panel 1. BNC video input Rear Panel 2. 3. 4. 12 VDC power input Network and status LEDs GPIO terminal block for DI, DO, relay, and RS-485 COM port “Restore default setting” button RJ45 10/100 Mbps Ethernet connector RS-232 COM port 5. 6. 7.
VPort 2110/2140/2141 Quick Installation Guide VPort 2140 Video Server Front Panel 1. Reset & default buttons for restoring the system 2. 3. 4. BNC video output (switch on the 75Ω DIP switch) BNC video input Video/camera number 5. 6. 7. 75Ω resistance DIP Switch System status LEDs Network status LEDs Rear Panel 8. 9. 10. 11. 12.
Product Description VPort 2141 Video Server Front Panel 2 2 1 ACTIVE 2 3 POWER LINK CONNECT FDX SERIAL 4 OFF 75 RESET ON VIDEO 1 VIDEO 2 6 5 VIDEO 3 3 VIDEO 4 4 3 1 1. Reset button for restoring the default configuration 2. 3. BNC Video Input (switch off the 75Ω DIP switch) Video/Camera Number 4. 5. 6.
3 Chapter 3 Getting Started Hardware Installation VPort 2110 Before powering on the VPort 2110 Video Server: 1. 2. 3. 4. 5. Connect your camera’s video output with the BNC video input. Connect VPort’s COM port with your camera’s COM port if you are using a PTZ Camera. Connect VPort’s 10/100 Mbps Ethernet port to the LAN (e.g., by connecting to a hub or switch). Connect I/O devices (such as sensors or alarms) with VPort’s GPIO Terminal Block. Connect the power supply.
VPort 2100 Series Quick Installation Guide Note To learn how to use a modem dial-up connection or null modem connection, please refer to the User’s Manual on the software CD. VPort 2140 Front Panel Rear Panel Take the following steps before powering on the VPort 2140 video server: 1. Connect your camera’s video output to the BNC video input. 2. Connect I/O devices (such as sensors or alarms) to VPort’s GPIO terminal block. 3.
Getting Started To learn how to use a modem dial-up connection or null modem connection, please refer to the User’s Manual on the software CD.
VPort 2100 Series Quick Installation Guide Assigning an IP Address to the VPort 2100 Series Video Server In a DHCP Server Networking Environment The VPort’s IP address is assigned by a DHCP server when the VPort is connected to a DHCP server network. In this case, use the DHCP Server’s IP address table or the MOXA VPort Installation Wizard utility to determine the IP address that was assigned by the DHCP Server. Note After powering on the VPort, wait a few seconds for the POST (Power On Self Test) to run.
Getting Started 4. 5. Assigned (IP assigned status), Model, and Auto IP (indicates whether or not this VPort has an auto IP assigned function) of the VPort will be listed in the VPort Installation Wizard window. Select the VPort by checking the box in front of the MAC address. Click the “Link to selected device” button to open the VPort’s web console via Internet Explorer. Note The IP assigned status will be listed as Yes if the VPort has been assigned an IP address.
VPort 2100 Series Quick Installation Guide Accessing VPort 2100 Video Servers 1. 2. Type the IP address in the web browser’s address input box and then press enter. A window will open asking you to enter the user name and password. For first time access, you must type root for user name, and the MAC address (without typing dashes) of that VPort for the password. Click on OK to continue.
Getting Started 4. The main page of the VPort 2100 server you just installed will appear. Click on the function links to configure the server. Note Refer to User’s Manual on the documentation CD for more details about the functions accessible from the main page.
A Appendix A Service Information This appendix shows you how to contact Moxa for information about this and other products, and how to report problems. In this appendix, we cover the following topics.
VPort 2100 Series Quick Installation Guide MOXA Internet Services Customer satisfaction is our number one concern, and to ensure that customers receive the full benefit of our products, Moxa Internet Services has been set up to provide technical support, driver updates, product information, and user’s manual updates. The following services are provided E-mail for technical support ...................................... support@moxanet.com Website for product information:.................................
Service Information Problem Report Form MOXA VPort 2100 Series Customer name: Company: Tel: Fax: Email: Date: 1. Moxa Product: VPort 2110 VPort 2140 VPort 2141 2. Serial Number: _________________ Problem Description: Please describe the symptoms of the problem as clearly as possible, including any error messages you see. A clearly written description of the problem will allow us to reproduce the symptoms, and expedite the repair of your product.
VPort 2100 Series Quick Installation Guide Product Return Procedure For product repair, exchange, or refund, the customer must: A-4 Provide evidence of original purchase. Obtain a Product Return Agreement (PRA) from the sales representative or dealer. Fill out the Problem Report Form (PRF). Include as much detail as possible for a shorter product repair time. Carefully pack the product in an anti-static package, and send it, pre-paid, to the dealer.
