User`s manual

NPort 5200 Series User’s Manual Introduction
1-3
Product Specifications
LAN
Ethernet 10/100 Mbps, RJ45
Protection Built-in 1.5 KV magnetic isolation
Serial Interface—NPort 5210/5210-T
Interface RS-232
No. of Ports 2
Port Type RJ45 (8-pin)
Signals TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
Serial Line Protection 15 KV ESD for all signals
Serial Interface—NPort 5230/5230-T
Interface RS-232, RS-422/485
No. of Ports 2 (1 port for RS-232, 1 port for RS-422/485)
Port Type Terminal Block (5 pins per port)
Signals RS-232: TxD, RxD, RTS, CTS, GND
RS-422: Tx+, Tx-, Rx+, Rx-, GND
RS-485 (2-wire): Data+, Data-, GND
RS-485 (4-wire): Tx+, Tx-, Rx+, Rx-, GND
Serial Line Protection 15 KV ESD for all signals
RS-485 Data Direction ADDC™ (Automatic Data Direction Control)
Serial Interface—NPort 5232/5232I/5232-T/5232I-T
Interface RS-422/485
No. of Ports 2 (for RS-422/485)
Port Type Terminal Block (5 pins per port)
Signals RS-422: Tx+, Tx-, Rx+, Rx-, GND
RS-485 (2-wire): Data+, Data-, GND
RS-485 (4-wire): Tx+, Tx-, Rx+, Rx-, GND
Serial Line Protection 15 KV ESD for all signals
NPort 5232I has 2 KV isolation protection
RS-485 Data Direction ADDC™ (Automatic Data Direction Control)
Power Line Protection
4 KV Burst (EFT), EN61000-4-4
2 KV Surge, EN61000-4-5
Advanced Built-in Features
Buzzer
Real-Time Clock
Watch Dog Timer