User`s manual

NPort 5200 Series User’s Manual Web Console Configuration
5-9
Auto report period
Setting Factory Default Necessity
Time interval (in seconds) 10 Optional
Serial Settings
Click on Serial Settings, located under Main Menu, to display serial port settings for ports 1
and 2.
To modify serial settings for a particular port, click on either Port 1 or Port 2 under Serial
Settings, located under Main Menu on the left side of the browser window.
Port alias
Setting Factory Default Necessity
1 to 15 characters
(E.g., PLC-No.1)
blank Optional
“Port alias” is included to allow easy identification of the serial devices that are connected to
NPort 5200’s serial port.