User`s manual

CN2610 User’s Manual Administrative Utilities
15-2
Ping
Ping is used to test network hardware connectivity and whether a network host is active.
1. From the MAIN MENU, select Utility, and then press Enter.
CN2610-8 CN2610-8_19 V2.0 MAIN MENU
------------------------------------------------------------------------------
Server Port seTting sAve [Utility] Restart Exit
Async server utilities
EEnter: select ESC: previous menu
2. From the UTILITY MENU, select Ping, and then press Enter.
CN2610-8 CN2610-8_19 V2.0 UTILITY MENU
------------------------------------------------------------------------------
[Ping] Monitor Diagnostic Upgrade Quit
Ping a host
Enter: select ESC: previous menu
3. Enter the target host IP address or target host name, and then press Enter.
CN2610-8 CN2610-8_19 V2.0
------------------------------------------------------------------------------
[Ping] Monitor Diagnostic Upgrade Quit
Ping a host
ESC: back to menu Enter: select
Press ESC to cancel …
PING 192.168.1.3: 56 data bytes
64 bytes from 192.168.1.3: icmp_seq=0. time=0 ms
64 bytes from 192.168.1.3: icmp_seq=1. time=0 ms
64 bytes from 192.168.1.3: icmp_seq=2. time=0 ms
4. Press Esc to return to Ping.
Monitor
The Monitor utility allows you to monitor serial line status (Line), network status (Network),
serial transmission flow (Async, async-Setting), routing, and PPP trace.
1. From the MAIN MENU, select Utility, and then press Enter.
CN2610-8 CN2610-8_19 V2.0 MAIN MENU
------------------------------------------------------------------------------
Server Port seTting sAve [Utility] Restart Exit
Async server utilities
EEnter: select ESC: previous menu
2. From the UTILITY MENU, select Monitor, and then press Enter.
CN2610-8 CN2610-8_19 V2.0 UTILITY MENU
------------------------------------------------------------------------------
Ping [Monitor] Diagnostic Upgrade Quit
Monitor async server status
Enter: select ESC: previous menu