User`s manual

CN2610 User’s Manual Setting Up Printer
12-7
Setting Value Notes Necessity
Queue name
(RAW)
Text Specify print queue’s name (in RAW mode) Fixed
Queue name
(ASCII)
Text Specify print queue’s name (in ASCII mode) Fixed
Append Form
Feed
Enable/
Disable
Specify paging Optional
TCP alive
check time
0-99 minutes The time period CN2610 waits before
checking if the TCP connection is alive or not.
If no response is received, CN2610 will reset
the port and terminate the connection.
Optional
Configuring the Serial Ports
Open Port Menu Æ Line to configure serial port settings.
1. From the MAIN MENU, select Port, and then press Enter.
CN2610-8 CN2610-8_19 V2.0 MAIN MENU
------------------------------------------------------------------------------
Server [Port] seTting sAve Utility Restart Exit
Examine/modify async server ports configuration
Enter: select ESC: previous menu
2. From the PORT MENU, select Line, and then press Enter.
CN2610-8 CN2610-8_19 V2.0 PORT MENU
------------------------------------------------------------------------------
Mode [Line] mOdem Welcome_MSG Quit
Examine/modify asynchronous port configuration
Enter: select ESC: previous menu
3. The Line page has pop-up selection lists for Port, Speed, Bits, Stop, Parity, FIFO,
RTS/CTS, XON/XOFF, and Discon. ctrl for each serial port. Each item is described in detail
below the figure.
CN2610-8 CN2610-8_19 V2.0
------------------------------------------------------------------------------
Mode [Line] mOdem Welcome_MSG Quit
Examine/modify asynchronous port configuration
ESC: back to menu Enter: select
Port Speed Bits Stop Parity FIFO RTS/CTS XON/XOFF Discon. ctrl
01 [115200] [8] [ 1 ] [None ] [yes] [yes] [no ] [None ]
02 [115200] [8] [ 1 ] [None ] [yes] [yes] [no ] [None ]
03 [115200] [8] [ 1 ] [None ] [yes] [yes] [no ] [None ]
04 [115200] [8] [ 1 ] [None ] [yes] [yes] [no ] [None ]
05 [115200] [8] [ 1 ] [None ] [yes] [yes] [no ] [None ]
06 [115200] [8] [ 1 ] [None ] [yes] [yes] [no ] [None ]
07 [115200] [8] [ 1 ] [None ] [yes] [yes] [no ] [None ]
08 [115200] [8] [ 1 ] [None ] [yes] [yes] [no ] [None ]
Setting Value Notes
Speed 50 bps to 921.6 Kbps Transmission rate
Bits 5, 6, 7, 8 Data bits
Stop 1, 1.5, 2 Stop bits