Specifications

8-42
www.moxa.com
[e-mail]
Serial-to-Ethernet Solutions
Serial Device Servers >
MiiNePort E1 Series
8
MiiNePort E1 Series
The MiiNe was created to provide manufacturers with a competitive
embedded serial-to-Ethernet solution. The MiiNePort E1, which uses
the MiiNe for its SoC, is one of the world’s tiniest embedded device
servers, and has the lowest power consumption of any similar product.
The MiiNe has the following features:
Designed for 1 or 2-port serial-to-Ethernet applications•
Uses a 32-bit ARM 7 core•
Uses Moxa’s own advanced UART technology•
Has 2 MB Flash and 4 MB SDRAM memory built in•
Moxa’s NetEZ technology gives serial device manufacturers a range of
powerful tools for integrating Ethernet capability into serial devices:
SCM: The MiiNePort E1’s Serial Command Mode (SCM) enables •
the device’s main system to reset the network and confi gure both
serial and Ethernet settings. This is done using simple command
frame format, and provides the convenience of being able to easily
confi gure the network settings at anytime.
The MiiNe—Moxa’s 2nd Generation SoC
10/100 Mbps embedded serial device servers
Same size as an RJ45 connector—only 33.9 x 16.25 x 13.5 mm ›
Extremely low power consumption—only 160 mA @ 3.3 VDC input ›
Uses the MiiNe, Moxa’s second generation SoC ›
NetEZ technology makes integration incredibly easy ›
Versatile choice of operation modes: Real COM, RFC2217, TCP ›
Server, TCP Client, UDP, and Modem
Moxa’s MiiNePort E1 embedded device servers are designed for
manufacturers who want to add sophisticated network connectivity
to their serial devices with minimal integration effort. The MiiNePort
E1 is empowered by the MiiNe, Moxa’s second generation SoC, which
supports 10/100 Mbps Ethernet, up to 921.6 Kbps serial baudrate,
a versatile selection of ready-to-use operation modes, and requires
Overview
only a small amount of power. By using Moxa’s innovative NetEZ
technology, the MiiNePort E1 can be used to convert any device with
a standard serial interface to an Ethernet enabled device in no time. In
addition, the MiiNePort E1 is the size of an RJ45 connector, making it
easy to fit into virtually any existing serial device.
NetEZ Technology
AutoCFG: The MiiNePort E1 supports AutoCFG, which provides an •
effortless way of confi guring network settings of many devices
during mass production.
Coming Soon
The certifi cation logos shown here apply to some or all of the products in this
section. For details, see “Regulatory Approvals” under “Specifi cations” below.