Specifications

8-2
www.moxa.com
info@moxa.com
Serial-to-Ethernet Solutions
Serial Device Servers >
8
Product Selection Guides
Combo Switch / Serial Device Server
NPort S8000: Ethernet Switch Specifi cations
Ethernet Interface
Standards
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X) and 100Base FX
IEEE 802.3x for Flow Control
IEEE 802.1D for Spanning Tree Protocol
IEEE 802.1w for Rapid STP
IEEE 802.1Q for VLAN Tagging
IEEE 802.1p for Class of Service
IEEE 802.1X for Authentication
IEEE 802.3ad for Port Trunk with LACP
Network Protocols
ICMP, IP, TCP, UDP, ARP, Telnet, DNS, HTTP, SMTP, SNTP,
IGMPv1/v2 device, GVRP, SNMPv1/v2c/v3, DHCP Server/
Client, DHCP Option 82, BootP, TFTP, SNTP, SMTP, RARP,
GMRP, LACP, RMON
MIB
MIB-II, Ethernet-Like MIB, P-BRIDGE MIB, Q-BRIDGE MIB,
Bridge MIB, RSTP MIB, RMON MIB Group 1, 2, 3, 9
Flow Control
IEEE 802.3x fl ow control, back pressure fl ow control interface
Optical Fiber Interface
Type
Multi-mode
Distance
0 to 2 km, 1310 nm (62.5/125 µm, 500 MHz*km)
Min. TX Output
-20 dBm
Max. TX Output
-14 dBm
Sensitivity
-34 to -30 dBm
Switch Properties
Priority Queues
4
Max. Number of
Available VLANs
64
VLAN ID Range
VID 1 to 4094
IGMP Groups
256
Switch Interface
RJ45 Ports
10/100BaseT(X) auto negotiation speed, F/H duplex mode, and
auto MDI/MDI-X connection
DIP Switches
Turbo Ring, Master, Coupler, Reserve
Alarm Contact
2 relay outputs with current carrying capacity of 1A @ 24 VDC
NPort S8000: General Specifi cations
Port Summary
Serial Ports
4 RS-232/422/485 ports
Ethernet Switch Ports
3 RJ45 copper ports, 2 multi-mode fi ber ports
Console Ports
1 (8-pin RJ45 connector)
LED Indicators
PWR1, PWR2, READY, MASTER, COUPLER, LINK4, LINK5
Physical Characteristics
Housing
Metal
Weight
995 g
Dimensions
73.1 x 134 x 105 mm
Environmental Limits
Operating Temperature
0 to 60°C
Operating Humidity
5 to 95% RH
Storage Temperature
-40 to 85°C
Power Requirements
Input Voltage
12 to 48 VDC
Power Consumption
935mA @ 12 V, 470 mA @ 24 V
Regulatory Approvals
EMC
CE (EN55022 Class A, EN55024), FCC Part 15 Subpart B
Class A
Safety
UL-508, UL (UL60950-1), LVD (EN60950-1)
EMS
IEC 61000-4-2, Level 4 (ESD)
IEC 61000-4-4, Level 4 (EFT)
IEC 61000-4-5 for serial port, Level 1 (Surge)
IEC 61000-4-5 for Power Line, Level 3 (Surge)
IEC 61000-4-5 for LAN port, Level 2 (Surge)
Reliability
Buzzer, RTC, WDT
Warranty
5 years (see www.moxa.com/warranty)
NPort S8000: Device Server Specifi cations
Serial Interface
Number of Ports
4
Serial Standards
RS-232/422/485
Connectors
DB9 male
Serial Line Protection
15 KV ESD protection for all signals
2 KV isolation protection
RS-485 Data Direction
Control
ADDC® (automatic data direction control)
Pull High/Low Resistor
for RS-485
1 KΩ, 150 KΩ
Terminator for RS-485
55 Ω, 120 Ω
Console Port
Dedicated RS-232 console port (8-pin RJ45)
Serial Communication Parameters
Data Bits
5, 6, 7, 8
Stop Bits
1, 1.5, 2
Parity
None, Even, Odd, Space, Mark
Flow Control
RTS/CTS and XON/XOFF
Baudrate
50 bps to 921.6 Kbps
Serial Signals
RS-232
TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422
Tx+, Tx-, Rx+, Rx-, GND
RS-485-4w
Tx+, Tx-, Rx+, Rx-, GND
RS-485-2w
Data+, Data-, GND
Software
Confi guration Options
Web Console, Telnet Console, Serial Console, Windows Search
Utility
Windows Real COM
Drivers
Windows 95, 98, ME, NT, 2000, XP x86/x64, 2003 x86/x64,
Vista x86/x64, 2008 x86/x64, Embedded CE 5.0/6.0, XP
Embedded
Fixed TTY Drivers
SCO Unix, SCO OpenServer, UnixWare 7, UnixWare 2.1, SVR
4.2, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i
Linux Real TTY Drivers
2.4.x, 2.6.x
Operation Modes
Real COM, TCP Server, TCP Client, UDP, RFC2217
Management
SNMP MIB-II
IP Routing
Static, RIP-I, RIP-II
Reliability
Alert Tools
Built-in buzzer and RTC (real-time clock)
Automatic Reboot
Trigger
Built-in WDT (watchdog timer)