Serial Device Servers Product Selection Guides Combo Switch / Serial Device Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-2 General-purpose Device Servers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-3 Industrial-grade Device Servers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-7 Embedded Device Servers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Serial-to-Ethernet Solutions Combo Switch / Serial Device Server NPort S8000: Ethernet Switch Specifications NPort S8000: Device Server Specifications Ethernet Interface Standards 8 Network Protocols Serial Device Servers > Product Selection Guides MIB Flow Control Serial Interface IEEE 802.3 for 10BaseT IEEE 802.3u for 100BaseT(X) and 100Base FX IEEE 802.3x for Flow Control IEEE 802.1D for Spanning Tree Protocol IEEE 802.1w for Rapid STP IEEE 802.1Q for VLAN Tagging IEEE 802.
Industrial Networking Solutions General-purpose Device Servers NPort® 5110 NPort® 5110-T NPort® 5130 NPort® 5150 NPort® DE-211 NPort® DE-311 NPort® 5210 NPort® 5210-T NPort® 5230 NPort® 5230-T --1 --RJ45 --1 --RJ45 --1 --RJ45 1 ----RJ45 --1 --RJ45 --1 --RJ45 --1 --RJ45 1.5 KV 1.5 KV 1.5 KV 1.5 KV 1.5 KV 1.5 KV 1.
Serial-to-Ethernet Solutions General-purpose Device Servers NPort® 5232 NPort® 5232-T NPort® 5232I NPort® 5232I-T NPort® 5410 NPort® 5430 NPort® 5430I NPort® 5450 NPort® 5450I --1 --RJ45 --1 --RJ45 --1 --RJ45 --1 --RJ45 --1 --RJ45 --1 --RJ45 --1 --RJ45 1.5 KV 1.5 KV 1.5 KV 1.5 KV 1.5 KV 1.5 KV 1.
Industrial Networking Solutions General-purpose Device Servers NPort® 5610-8 NPort® 5610-8-48V NPort® 5630-8 NPort® 5650-8 NPort® 5650-8-M-SC NPort® 5650-8-S-SC NPort® 5610-16 NPort® 5610-16-48V --1 --RJ45 --1 --RJ45 --1 --RJ45 --1 --RJ45 ----1 (multi-mode) SC ----1 (single-mode) SC --1 --RJ45 --1 --RJ45 1.5 KV 1.5 KV 1.5 KV 1.5 KV --- --- 1.5 KV 1.
Serial-to-Ethernet Solutions General-purpose Device Servers NPort® 5630-16 NPort® 5650-16 NPort® 5650-16-M-SC NPort® 5650-16-S-SC NPort® 5610-8-DT NPort® 5610-8-DT-J NPort® 5650-8-DT NPort® 5650I-8-DT NPort® 5650-8-DT-J --1 --RJ45 --1 --RJ45 ----1 (multi-mode) SC ----1 (single-mode) SC --2 --RJ45 --2 --RJ45 --2 --RJ45 --2 --RJ45 --2 --RJ45 1.5 KV 1.5 KV --- --- 1.5 KV 1.5 KV 1.5 KV 1.5 KV 1.
Industrial Networking Solutions Industrial-grade Device Servers NPort® IA5150 NPort® IA5150-T NPort® IA5150I NPort® IA5150I-T NPort® IA5150-M-SC NPort® IA5150-M-SC-T NPort® IA5150I-M-SC NPort® IA5150I-M-SC-T NPort® IA5150-S-SC NPort® IA5150-S-SC-T NPort® IA5150I-S-SC NPort® IA5150I-S-SC-T NPort® IA5250 NPort® IA5250-T 2 --RJ45 2 --RJ45 --1 (multi-mode) SC --1 (multi-mode) SC --1 (single-mode) SC --1 (single-mode) SC 2 --RJ45 1.5 KV 1.5 KV --- --- --- --- 1.
Serial-to-Ethernet Solutions Embedded Device Servers MiiNePort E1 MiiNePort E1-T NE-4110S Type Drop-in module Ready-to-go stand-alone modules Dimensions 33.9 x 16.25 x 13.5 mm 57 × 40 mm 57 × 40 mm 57 × 40 mm 1 RJ45 1 RJ45 1 RJ45 1.5 KV 1.
Industrial Networking Solutions Introduction to Serial Device Servers Device server technology makes device networking easy Device servers are used to connect serial devices to Ethernet LANs, and are able to transmit data both to and from the serial device.
Serial-to-Ethernet Solutions NPort® Provides a Choice of Operation Modes Socket Modes 8 TCP Server Mode TCP Client Mode When the NPort® is configured for TCP Server Mode, each serial 1 port is assigned a unique IP:Port TCP/IP Ethernet combination on the TCP/IP network, 2 and the NPort® waits passively TCP Server for a host computer to establish a connection with the attached serial RS-23 RS-232 device.
Industrial Networking Solutions Mode Selection Flowchart Start NO YES Using socket program? TCP Which protocol, TCP or UDP? Host application is server or client? Using legacy COM-based software? Host requires more COM ports? YES NO Using MOXA's drivers? UDP Need to extend serial transmission range? NO NO YES YES 8 Client Need to perform console management? Server NO YES NO Reverse Telnet Contact your saleperson.
Serial-to-Ethernet Solutions NPort® Administrator Makes Installation Easy NPort® Administrator is designed to make it easy to install and configure NPort® 5000 device servers over the network. Five groups of functions are supported to allow off-line COM mapping, device monitoring, and searching for NPort® device severs over the network.
Industrial Networking Solutions IP Serial Library What is IP Serial Library? The IP Serial Library is a collection of Windows functions for NPort® 5000 device servers. Serial command sets and common subroutines are provided. The purpose of the library is to help reduce complexity and increase efficiency when programming serial communication applications that run over a TCP/IP network. For example, Telnet is limited because it can only transfer data but cannot monitor or configure serial line parameters.
Serial-to-Ethernet Solutions CASE STUDY Power Generation Remote Monitoring and Control of a Windmill Generator As concerns over global warming continue to grow, green technologies are becoming increasingly popular. Wind turbine companies provide an excellent alternative to burning fossil fuels by harnessing kinetic energy from the wind and converting it into electricity.
Industrial Networking Solutions CASE STUDY Automatic Meter Reading Automatic Meter Reading for a Centralized Power Meter Application Automated meter reading (AMR) technology automatically collects data from devices such as electricity, water, and gas meters, and transfers that data to a central database for billing or analysis.
Serial-to-Ethernet Solutions NPort® S8000 Series Combo switch / serial device server › 4-port RS-232/422/RS-485 serial device server NPort S8455I-MM-SC • Serial QoS for configuring serial data transmission priority • 2 KV (DC) isolation protection for each serial port • Adjustable pull high/low resistor for RS-485 ports › 5-port managed Ethernet switch built in • Two fiber Ethernet ports and three Ethernet ports • Ethernet redundancy with Turbo Ring® (recovery time < 20 ms) or RSTP/STP (IEEE 802.
Industrial Networking Solutions Rugged Design with Complete Protection › UL508 safety › › › To meet customers’ critical application requirements, the NPort® S8455I-MMSC has been certified to meet the UL 508 national and international standard. The UL 508 standard covers the safety requirements for industrial control equipment. 3-way surge protection The NPort® S8455I-MM-SC is equipped with a surge protector for power, Ethernet interface, and serial interface for protection against voltage spikes.
Serial-to-Ethernet Solutions Appearance Power input (terminal block) 4 DIP switches for Turbo Ring settings Relay output, DI (terminal block) LED indicators Multi-mode fiber port Serial port (DB9 male) Ethernet port (RJ45) 8 General Specifications Serial Device Servers > NPort® S8000 Series Port Summary Power Requirements Serial Ports: 4 RS-232/422/485 ports Ethernet Switch Ports: 3 RJ45 copper ports, 2 multi-mode fiber ports Console Ports: 1 (8-pin RJ45 connector) LED Indicators: PWR1, PWR2, REA
Industrial Networking Solutions Ethernet Switch Specifications Ethernet Interface Optical Fiber Interface Standards: IEEE 802.3 for 10BaseT IEEE 802.3u for 100BaseT(X) and 100Base FX IEEE 802.3x for Flow Control IEEE 802.1D for Spanning Tree Protocol IEEE 802.1w for Rapid STP IEEE 802.1Q for VLAN Tagging IEEE 802.1p for Class of Service IEEE 802.1X for Authentication IEEE 802.
Serial-to-Ethernet Solutions NPort® 5100 Series 1-port RS-232/422/485 serial devic device servers › Real COM/TTY drivers for Windows and Linux › Standard TCP/IP interface and versatile operation modes › Easy-to-use Windows utility for configuring multiple device servers › Built-in 15 KV ESD protection for all serial signals › SNMP MIB-II for network management › Configure by Telnet or web browser › Adjustable termination resistor for RS-485 ports 8 Serial Device Servers > NPort® 5100 Series The certific
Industrial Networking Solutions Appearance NPort® 5150 NPort® 5110 NPort® 5130 Ethernet RJ45 10/100 Mbps Reset button Power input Power jack 12 to 48 VDC Ethernet RJ45 10/100 Mbps Reset button Power input Power jack 12 to 48 VDC Power input Power jack 12 to 48 VDC Reset button Ethernet RJ45 10/100 Mbps DK-35A DIN-Rail Kit 8 RS-232/422/485 Specifications Ethernet Interface RS-232 RS-422/485 Fixed TTY Drivers: SCO Unix, SCO OpenServer, UnixWare 7, UnixWare 2.1, SVR 4.2, QNX 4.
Serial-to-Ethernet Solutions Dimensions NPort® 5110 NPort® 5130 12-48 NPort® 5150 12-48 12-48 Port 1 RS-422/485 Port 1 RS-232/422/485 8 Serial Device Servers > NPort® 5100 Series Pin Assignment DB9 male connector 1 2 3 4 5 NPort® 5110 (RS-232) NPort® 5130 (RS-422/485) RS-232 PIN RS-422/485-4w RS-485-2w 1 DCD 1 TxD-(A) – 1 DCD TxD-(A) 2 RxD 2 TxD+(B) – 2 RxD TxD+(B) – 3 TxD 3 RxD+(B) Data+(B) 3 TxD RxD+(B) Data+(B) 4 DTR 4 RxD-(A) Data-(A) 4 DTR RxD-(A) Data
Industrial Networking Solutions NPort® DE-211/311 1-port p RS-232/422/485 / / serial device servers › 3-in-1 serial port: RS-232, RS-422, or RS-485 › Versatile operation modes, including TCP Server, TCP Client, UDP, Ethernet Modem, and Pair Connection › Real COM/TTY drivers for Windows and Linux › 10M and 100M Ethernet speeds detected automatically › 2-wire RS-485 with patented Automatic Data Direction Control (ADDC®) › Built-in 15 KV ESD protection for all serial signals NPort® DE-3 DE-311 NPort® ort®
Serial-to-Ethernet Solutions Regulatory Approvals MTBF (meantime between failures): NPort DE-211: 347822 hrs NPort DE-311: 225529 hrs EMC: CE (EN55022 Class B, EN55024 Class B), FCC Part 15 Subpart B Safety: UL (UL60950), TÜV (EN60950) Medical: EN60601-1-2 Class B, EN55011 (DE-311 only) Warranty Warranty Period: 5 years Details: See www.moxa.com/warranty Dimensions ON 1 2 DIP 3 4 22.0 mm (0.87 in) NPort® DE-211 22.0 mm (0.87 in) NPort® DE-311 22.0 mm (0.87 in) 22.0 mm (0.
Industrial Networking Solutions NPort® 5200 Series 2-port RS-232/422/485 serial device servers › Small size for easy installation › Versatile socket operation modes, including TCP Server, TCP Client, and UDP › Easy-to-use Windows utility for configuring multiple device servers › Supports 10/100M Ethernet › Patented ADDC® (Automatic Data Direction Control) for 2-wire and 4-wire RS-485 › Built-in 15 KV ESD protection for all serial signals › SNMP MIB-II for network management Standard TCP/IP Protocols and
Serial-to-Ethernet Solutions Appearance NPort® 5232 Ethernet RJ45 10/100 Mbps Reset Button NPort® 5230 NPort® 5210 Ethernet RJ45 10/100 Mbps Power Input Terminal Block 12 to 48 VDC Power Input Terminal Block 12 to 48 VDC Power Input Terminal Block 12 to 48 VDC Reset Button Reset Button Ethernet RJ45 10/100 Mbps DK-35A DIN-Rail Kit 8 Available Accessory Serial Device Servers > NPort® 5200 Series DIN-Rail Kit (Optional) RS-422/485 RS-232 Specifications 8-pin RJ45, RS-232 Ethernet Interface Sof
Industrial Networking Solutions Power Requirements Reliability Input Voltage: 12 to 48 VDC Power Consumption: NPort® 5210: 325 mA @ 12 V, 190 mA @ 24 V NPort® 5230: 325 mA @ 12 V, 190 mA @ 24 V NPort® 5232: 280 mA @ 12 V, 150 mA @ 24 V NPort® 5232I: 509.
Serial-to-Ethernet Solutions Pin Assignment NPort® 5210/5210-T (RS-232) R+/D+ R-/D- GND GND T+ Rx- Tx- / Data- GND Rx+ Tx+ / Data+ R-/D- GND T- R+/D+ Tx- / Data- P2 RS-485/422 Tx+ / Data+ T- GND T+ Serial Device Signals Ordering Information Available Models Package Checklist NPort® 5210: 2-port RS-232 device server, 0 to 55°C operating temperature NPort® 5230: 2-port device server with 1 RS-232 port and 1 RS-422/485 port, 0 to 55°C operating temperature NPort® 5232: 2-port RS-422/4
Industrial Networking Solutions NPort® 5400 Series 4-port RS-232/422/485 serial device servers › Easy IP address configuration with built-in LCD panel › 10/100M auto-sensing Ethernet › 4 serial ports, with support for RS-232, RS-422, and RS-485 › Built-in 15 KV ESD surge protection for all serial signals › Versatile socket operation modes, including TCP Server, TCP Client, and UDP › Choice of configuration methods: Web console, Telnet console, and Windows utility › SNMP MIB-II for network management › 2 K
Serial-to-Ethernet Solutions Appearance NPort® 5410 Power Input Power Jack (1 to 48 VDC) 8 Power Input Terminal Block (12 to 48 VDC) Reset Button NPort® 5450/5450I LEDs LAN and Serial Status LCD Panel DK-35A DIN-Rail Kit Serial Device Servers > NPort® 5400 Series Available Accessory Terminal Block DB9 male DIN-Rail or Panel mounting Optional DIN-Rail (35 mm) Mounting Kit DB9 male Push Buttons Specifications Ethernet Interface Software Number of Ports: 1 Speed: 10/100 Mbps, auto MDI/MDIX Con
Industrial Networking Solutions Regulatory Approvals MTBF (meantime between failures): NPort® 5410: 205153 hrs NPort® 5430: 201699 hrs NPort® 5430I: 114540 hrs NPort® 5450: 206903 hrs NPort® 5450I: 206903 hrs EMC: CE (EN55022 and EN55024 Class A), FCC Part 15 Subpart B Class A Safety: UL (UL60950-1), TÜV (EN60950-1) Marine: DNV Medical: EN60601-1-2 Class B, EN55011 Warranty Reliability Warranty Period: 5 years Details: See www.moxa.
Serial-to-Ethernet Solutions NPort® 5600 Rackmount Series 8 and 16-port RS-232/422/485 serial device servers › 8 or 16 serial ports supporting RS-232/422/485 › Standard 19-inch rackmount size › 10/100M auto-sensing Ethernet › Built-in 15 KV ESD protection for all serial signals › Easy IP address configuration with LCD panel › Choice of configuration methods: Web console, Telnet console, and Windows utility › Versatile socket operation modes, including TCP Server, TCP Client, UDP, and Real COM › SNMP MIB-I
Industrial Networking Solutions Specifications Ethernet Interface Physical Characteristics Number of Ports: 1 Speed: 10/100 Mbps, auto MDI/MDIX Connector: 8-pin RJ45 Magnetic Isolation Protection: 1.
Serial-to-Ethernet Solutions Dimensions 198 mm (7.8 in) 5610-16 Serial ports 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 45 mm (1.77 in) 8 16 LA N Serial Device Servers > NPort® 5600 Rackmount Series AC POWER 100-240V,47-63Hz 440 mm (17.
Industrial Networking Solutions NPort® 5600 Desktop Series 8-port RS-232/422/485 serial device servers › 8 serial ports supporting RS-232/422/485 › Compact desktop design › 10/100M auto-detecting Ethernet › Built-in 15 KV ESD protection for all serial signals › Easy IP address configuration with LCD panel › Choice of configuration methods: Web console, Telnet console, and Windows utility › Versatile socket operation modes, including TCP Server, TCP Client, UDP, and Real COM › SNMP MIB-II for network manag
Serial-to-Ethernet Solutions Appearance LCD Panel LED Indicators Push Buttons Ethernet Switch RJ45 10/100 Mbps 8 Power Input Both power Jack and Terminal block 12-48VDC Reset Button RS-232 Console Port Serial Device Servers > NPort® 5600 Desktop Series Specifications Ethernet Interface Fixed TTY Drivers: SCO Unix, SCO OpenServer, UnixWare 7, UnixWare 2.1, SVR 4.2, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i Linux Real TTY Drivers: Linux kernel 2.4.x, 2.6.
Industrial Networking Solutions Reliability Warranty Alert Tools: Built-in buzzer and RTC (real-time clock) Automatic Reboot Trigger: Built-in WDT (watchdog timer) MTBF (meantime between failures): 163356 hrs Warranty Period: 5 years Details: See www.moxa.
Serial-to-Ethernet Solutions NPort® IA5000 Series 1 and 2-port serial device servers for industrial automation › Versatile socket operation modes, including TCP Server, TCP Client, UDP › Patented ADDC® (automatic data direction control) for 2-wire and 4-wire RS-485 › Cascading Ethernet ports for easy wiring (applies only to RJ45 connectors) › Redundant DC power inputs › Warning by relay output and e-mail › 10/100BaseTX (RJ45) or 100BaseFX (single mode or multi-mode with SC connector) › IP30-rated housing
Industrial Networking Solutions Redundant Power Inputs The NPort® IA5000 device servers have two power inputs that can be connected simultaneously to live DC power sources. If one power source fails, the other source takes over automatically. Redundant power inputs help assure non-stop operation of your device server.
Serial-to-Ethernet Solutions Specifications Ethernet Interface (NPort® IA5150/5150I/5250) Environmental Limits Number of Ports: 2 Speed: 10/100 Mbps, auto MDI/MDIX Connector: 8-pin RJ45 Magnetic Isolation Protection: 1.5 KV built-in Operating Temperature: Standard Models: 0 to 55°C (32 to 131°F) Wide Temp.
Industrial Networking Solutions Dimensions 20.6 mm 29.91 mm (0.81 in) (1.18 in) NPort IA5150I-S-SC NPort IA5150 NPort IA5150I-M-SC NPort IA5150I NPort IA5150-S-SC NPort IA5250 NPort IA5150-M-SC 29 mm (1.14 in) 29 mm (1.14 in) 118.5 mm (4.67 in) 66.6 mm (2.62 in) 79.5 mm (3.13 in) 92.4 mm (3.64 in) 69.5 mm (2.74 in) 20 mm (0.79 in) NPort IA5150 NPort IA5150 I NPort IA5150-S-SC NPort IA5150-M-SC NPort IA5150 I -S-SC NPort IA5150 I -M-SC 89.2 mm (3.51 in) NPort IA5250 25.9 mm (1.02 in) 35 mm (1.
on Co m in g So Serial-to-Ethernet Solutions MiiNePort E1 Series 10/100 Mbps embedded serial device servers › Same size as an RJ45 connector—only 33.9 x 16.25 x 13.5 mm › Extremely low power consumption—only 160 mA @ 3.
Industrial Networking Solutions • MCSC: In some special circumstances, device end-users need the device to be in Server mode and Client mode at the same time, which requires that the embedded device server support multi-channel communication. The MiiNePort E1’s Multi-Channel Serial Communication (MCSC) feature uses a clever software solution to provide the device with multi-channel functionality.
Serial-to-Ethernet Solutions Specifications Form Factor Windows Real COM Drivers: Windows 95, 98, ME, NT, 2000, XP x86/x64, 2003 x86/x64, Vista x86/x64, 2008 x86/x64, Embedded CE 5.0/6.0, XP Embedded Fixed TTY Drivers: SCO Unix, SCO OpenServer, UnixWare 7, SVR 4.2, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x Linux Real TTY Drivers: Linux kernel 2.4.x, 2.6.x Operation Modes: TCP Server, TCP Client, UDP, Real COM mode, Modem Mode, RFC2217 Type: Drop-in module Dimensions: 33.9 x 16.25 x 13.5 mm (13.
Industrial Networking Solutions NE-4100 Series 10/100 Mbps embedded serial device servers NE-4110S/4110A NE-4120S/4120A NE-4100T › 10/100 Mbps Ethernet interface › Up to 230.4 Kbps baudrate support › Choice of operation modes: Real COM, TCP Server, TCP Client, and UDP › DHCP, BootP, Static IP, and ARP supported › SNMP and e-mail alerts for event trapping and notification › Half the size of a credit card—only 57 × 40 mm › Low power consumption at 1.
Serial-to-Ethernet Solutions Powerful, User-friendly Utilities Web-based Configuration Configure and manage embedded device servers with Moxa’s Windows Utility NE-4100 embedded device servers can be configured with the web console, which can be accessed from the web browser of any networked computer. Network Enabler Administrator is a powerful, Windows-based configuration and management tool for NE-4100 embedded device servers.
Industrial Networking Solutions NE-4110/4120 Series NE-4110S/4120S NE-4110A/4120A J1 J1 J2 GND 14 13 VCC(+5V) GND 12 11 VCC(+5V) DIO0 10 9 10M_LED DIO1 8 7 100M_LED DIO2 6 5 Ready_LED DIO3 4 3 Reset TxD1 2 1 RxD1 NC CTS0 DSR0 DTR0 10 8 6 4 RxD0 2 9 7 5 3 1 NC RTS0 GND TxD0 DCD0 NC NC NC RxD- (Data-) TxD+ 10 8 6 4 2 9 7 5 3 1 NC NC GND RxD+ (Data+) For 2-wire RS-485 mode, Pin 3 is Data+, Pin 4 is Data- TxD- NE-4110T Pin No. 14 15 16 17 18 19 20 21 22 23 24 25 26 36 mm (1.
Serial-to-Ethernet Solutions Power Requirements Input Voltage: 5 VDC (±5%) Power Consumption: 290 mA @ 5 VDC max. Regulatory Approvals EMC: CE EN55022 Class A, FCC Part 15 Subpart B Class A MTBF (meantime between failures): NE-4100T: 288173 hrs NE-4110A: 289573 hrs NE-4110S: 290276 hrs NE-4120A: 289573 hrs NE-4120S: 285874 hrs Reliability Warranty Automatic Reboot Trigger: Built-in WDT (watchdog timer) Warranty Period: 5 years Details: See www.moxa.
Industrial Networking Solutions WE-2100T Series Wireless LAN embedded serial device servers › Connects serial devices to IEEE 802.11a/b/g networks › Choice of operation modes: Real COM, TCP Server, TCP Client, UDP, and RFC2217 › Windows (including Vista!) real COM and Linux fixed TTY drivers provided › Wireless security with WEP, WPA, and WPA2 › Select any baudrate between 50 bps and 921.
Serial-to-Ethernet Solutions Environmental Limits Antenna Connector: Reverse SMA Antenna Gain: 2 DBi Operating Temperature: 0 to 55°C (32 to 131°F) Operating Humidity: 5 to 95% RH Storage Temperature: -20 to 70°C (-4 to 158°F) Serial Interface Number of Ports: 1 Serial Standards: Port 1: TTL Port 2: TTL console port Surface Temperature (at full baudrate of 921.6 Kbps) Serial Communication Parameters Data Bits: 5, 6, 7, 8 Stop Bits: 1, 1.
