User`s manual

EM-1220 LX User’s Manual Getting Started
Configuring the Ethernet Interface
In this section, we use the serial console to explain how to modify the EM-1220-LX’s network
settings.
1. Change directories by issuing the command cd /etc.
Type the command vi rc to use VI Editor to edit the configuration file. The IP addresses for
the EM-1220-LX’s LAN1 and LAN2 are:
ifconfig eth0 192.168.3.127
ifconfig eth1 192.168.4.127
as shown in the following figure. Edit these two lines to modify the static IP addresses.
2-4