User`s manual

NE-4100 Series User’s Manual Network Enabler Administrator
7-19
COM Settings
COM Settings is used to assign the local COM port number to the selected module, adjust the
module’s serial settings, and adjust some advanced settings. Select COM Settings in the COM
Mapping context menu. Note that this menu may also be opened by right-clicking COM
Mapping in the navigation panel or by right-clicking the desired module in the module list.
Multiple modules may be selected for configuration at the same time. Remember to use Apply
Change to save your changes, or Discard Change to undo the changes. To activate the mappings,
use Enable.
Basic Settings
In the Basic Settings tab, you may map a local COM port number to the selected module.
Make sure that Auto Enumerating COM Number for Selected Ports is checked when using
mapping to multiple modules. When checked, this option automatically assigns available COM
numbers sequentially. If not checked, each module will have to be manually assigned a COM port
number.