User`s guide

NE-4100 Series Serial Command Mode User’s Guide
Page 6
OP Code
Settings
Parameter Device setting
UF 0 – 65535 (ms) Force Tx Timeout
Digital IO
DM bytes 1 and 2 (DIO #):
0: DIO_0
1: DIO_1
2: DIO_2
3: DIO_3
byte 3 (DIO Mode)
0: input
1: output
DIO Mode
(e.g., ‘000’ sets DIO_0 to input mode)
DS bytes 1 and 2 (DIO #)
0: DIO_0
1: DIO_1
2: DIO_2
3: DIO_3
byte 3 (DIO Status)
0: low
1: high
DIO Status
(e.g., ‘011’ sets DIO_1 to high)
Serial Command Mode
ES 0: Disable
1: Enable HW Trigger
2: Enable SW Trigger
Enable Serial Command Mode
EC 3 4-byte characters Enter Command Mode Characters
(in HEX format; e.g., 2A EE 5F)