User`s guide

NE-4100 Series Serial Command Mode User’s Guide
Page 5
OP Code
Settings
Parameter Device setting
C1 0 – 65535 Client Port 1
C2 0 – 65535 Client Port 2
C3 0 – 65535 Client Port 3
C4 0 – 65535 Client Port 4
CT 0 – 99 (minutes) TCP Alive Check Timeout
CI 0 – 65535 (ms) Inactivity Timeout
CX 0: Disable
1: Enable 1 character
2: Enable 2 characters
Number of delimiters
CY ascii character
(e.g., ‘a1’)
Delimiter 1
CZ ascii character
(e.g., ‘a1’)
Delimiter 2
CF 0 – 65535 (ms) Force Tx Timeout
UDP Mode
UL 0 – 65535 Local Listen Port
UA xxx.xxx.xxx.xxx
(e.g., 192.168.1.1)
First IP of range 1
UB xxx.xxx.xxx.xxx
(e.g., 192.168.1.1)
First IP of range 2
UC xxx.xxx.xxx.xxx
(e.g., 192.168.1.1)
First IP of range 3
UD xxx.xxx.xxx.xxx
(e.g., 192.168.1.1)
First IP of range 4
Ua xxx.xxx.xxx.xxx
(e.g., 192.168.1.1)
Last IP of range 1
Ub xxx.xxx.xxx.xxx
(e.g., 192.168.1.1)
Last IP of range 2
Uc xxx.xxx.xxx.xxx
(e.g., 192.168.1.1)
Last IP of range 3
Ud xxx.xxx.xxx.xxx
(e.g., 192.168.1.1)
Last IP of range 4
U1 0 – 65535 UDP Port 1
U2 0 – 65535 UDP Port 2
U3 0 – 65535 UDP Port 3
U4 0 – 65535 UDP Port 4
UX 0: Disable
1: Enable 1 character
2: Enable 2 characters
Number of delimeters
UY ascii character
(e.g., ‘a1’)
Delimiter 1
UZ ascii character
(e.g., ‘a1’)
Delimiter 2