User`s guide

NE-4100 Series Serial Command Mode User’s Guide
Page 19
9
9
Chapter 9 Factory Defaults
The factory default settings for the serial port, Ethernet port, operation mode, and trigger
method are given in this chapter.
Serial Port Defaults
Baud Rate (transmission rate) 9600 bps
Parity None
Data Bits 8
Stop Bit 1
Flow Control No
FIFO Enabled
Ethernet Port Defaults
IP Configuration Static
IP Address 192.168.127.254
Netmask 255.255.255.0
Gateway
none
Default Operation Mode
Operation Mode TCP Server Mode
Default Trigger Method
Trigger Method HW Trigger