User`s guide

NE-4100 Series Serial Command Mode User’s Guide
Page 12
3. Modify the Trigger Setting and SW Trigger Character as needed, and then click on
Submit.
Serial Console
To access NE-4100-CMD’s Serial Console utility, connect the Network Enabler Starter Kit’s
serial console port (P1) to your PC’s serial port, and then use a terminal emulator program (such as
Moxa PComm Terminal Emulator) to enter the Console Utility. The serial console port settings are
“19200, no, 8, 1”. Details of how to connect via the serial console port can be found in the
NE-4100 Series User’s Manual. The text-based configuration utility works exactly the same as if
connecting by Telnet Console. See the Telnet Console section above for details.