Network Hardware User Manual

18
New Product Showcase
2
www.moxa.com
[e-mail]
New Product Showcase
Intel Celeron M 1 GHz processor with 400 MHz FSB ›
Built-in DDR2 SDRAM and industrial flash disk module ›
Quad Gigabit Ethernet ports for network redundancy ›
Software selectable RS-232/422/485 with 2 KV isolation protection ›
PCI expansion slots for inserting expansion modules ›
1 CompactFlash socket for storage expansion ›
USB 2�0 ports for high speed peripherals, supporting system bootup ›
19-inch rackmount, 2U high form factor ›
100/240 VAC/VDC power inputs ›
Ready-to-Run Linux, WinCE 6�0, or Windows XP Embedded platform ›
Fanless design ›
Cirrus Logic EP9315 ARM9 CPU, 200 MHz ›
128 MB RAM on-board, 32 MB flash disk ›
4 software-selectable RS-232/422/485 serial ports ›
VGA interface for field site monitoring ›
Dual 10/100 Mbps Ethernet for network redundancy ›
8+8 DI/DO channels, up to 30 VDC12 to 48 VDC power input design ›
Supports CompactFlash and USB 2�0 hosts ›
Ready-to-run Linux or WinCE 6�0 platform ›
H-type heat dissipation design for system reliability ›
-40 to 75°C wide operating temperature model available ›
Cirrus Logic EP9315 ARM9 CPU, 200 MHz ›
128 MB RAM on-board, 32 MB flash disk ›
VGA interface for field site monitoring ›
2 KV digitally isolated RS-232/422/485 serial ports ›
Dual 10/100 Mbps Ethernet for network redundancy ›
Dual 2 KV digitally isolated CAN ports with CANopen protocol support ›
8+8 DI/DO with 3 KV optical isolation protection ›
12 to 48 VDC redundant power input design ›
Supports CompactFlash and USB 2�0 hosts ›
Ready-to-run › Linux or WinCE 6�0 platform
-40 to 75°C wide temperature models available
›
x86-based rackmount computers
with VGA, 4 Gigabit Ethernet ports,
2 peripheral expansion slots,
CompactFlash, USB
RISC-based computers with
4 serial ports, dual LANs, VGA,
DIO, CompactFlash, USB
RISC-based computers with 2 or 4
digitally isolated serial ports, dual LANs,
VGA, CAN, DIO, CompactFlash, USB
DA-682 Series (page 15-52)
IA260 Series (page 16-3) IA-261-I/262-I Series (page 16-6)
Features
Features Features
Embedded Computers for Automation
Intel XScale IXP435 533 MHz processor ›
256 MB DDR2 SDRAM and 16 MB Flash ROM onboard ›
32 MB NAND Flash for data storage ›
8 RS-232/422/485 serial ports ›
2 CANbus ports ›
12 digital input and 12 digital output channels ›
3 10/100 Mbps Ethernet ports ›
2 USB 2�0 hosts for mass storage devices ›
Ready-to-run Linux platform ›
Robust, fanless design ›
-40 to 75°C wide temperature model available ›
RISC-based industrial embedded
computers with 8 serial ports, 3 LANs,
DIO, 2 CAN ports, CompactFlash, USB
UC-8418 Series (page 15-29)
Features
Intel Celeron M 1 GHz processor with 400 MHz FSB ›
1 x 200-pin DDR2 SODIMM socket, supporting DDR2 400 up to 1 GB ›
6 10/100 Mbps Ethernet ports ›
1 CompactFlash socket, 1 IDE and serial ATA-150 connectors for storage expansion ›
USB 2�0 ports for high speed peripherals ›
Serial port speed from 50 to 921�6 Kbps, supporting nonstandard baudrates ›
Embedded Linux, WinCE 6�0, or WinXPe platform ›
19-inch rackmount model, 1U high ›
Dual 100/240 VAC/VDC power input (DP/PP version) ›
Fanless Design ›
x86-based rackmount embedded computer
with 4 isolated RS-232 and 8 isolated RS-485
ports, 6 LANs, VGA, CompactFlash, USB
DA-681 Series (page 15-49)
Features