Network Hardware User Manual

Industrial Networking Solutions
15
2
[e-mail]
www.moxa.com
New Product Showcase
Hi-Speed USB 2�0 for up to 480 Mbps USB transmission ›
USB-IF certification ›
Dual power supply (power jack and terminal block) ›
15 KV ESD Level 4 protection for all USB ports ›
Rugged metal housing ›
DIN-Rail and wall mountable ›
Comprehensive diagnostic LEDs ›
Choose bus power or external power (UPort™ 404) ›
19-inch chassis for rackmount use ›
19 slots for high density applications ›
Supports hot-swap and dual power input with redundancy ›
Fan-less chassis design reduces repair time ›
RS-232, fiber, and RS-422/485 3-way communication
›
Rotary switch to change the pull high/low resistor value ›
Extend RS-232/422/485 transmission up to: ›
40 km with single-mode ·
5 km with multi-mode ·
3-way Galvanic Isolation (for “I” model only) ›
-40 to 85°C wide temperature models available ›
Class I, Div� II certification (Pending) ›
Hi-Speed USB 2�0 for up to 480 Mbps USB transmission ›
USB-IF Certification ›
Compatible with USB 1�1 devices ›
15 KV ESD Level 4 protection for all USB ports ›
Wall mountable ›
Comprehensive diagnostic LEDs ›
Full 500 mA of power per port ›
Choose bus power or external power (UPort™ 204 only) ›
Extend RS-232/422/485 transmission up to: ›
40 km with single mode ·
5 km with multi-mode ·
1K or 150K ohm adjustable pull high/low resistor ›
“Ring” and “Point-to-Point” transmission supported ›
“Ring” and “Point-to-Point” transmission ›
Extends RS-232/422/485 transmission up to: ›
40 km with single-mode—TCF-142-S ·
5 km with multi-mode—TCF-142-M ·
Compact size ›
Decreases signal interference ›
Protects against electrical interference and chemical corrosion ›
Supports baudrates of 50 bps to 921�6 Kbps ›
Wide temperature models available (-40 to 75°C) ›
4 and 7-port industrial-grade
USB hubs
Rackmount chassis for the
NRack System
Industrial serial-to-fiber converters
4 and 7-port entry-level
USB hubs
RS-232/422/485 to fiber
slide-in modules for the
NRack System
RS-232/422/485 to optical
fiber media converters
UPort™ 404/407 (page11-27)
TRC-190 Series (page 12-7)
ICF-1150 Series (page 12-11)
UPort™ 204/207 (page 11-29)
TCF-142-RM Series (page 12-9)
TCF-142 Series (page 12-14)
Features
Features
Features
Features
Features
Features
Media Converters
Use either external power or power over serial ›
Extends RS-232 transmission up to: ›
40 km with single-mode—TCF-90-S ·
5 km with multi-mode—TCF-90-M ·
Reduces signal interference ›
Protects against electrical interference or chemical corrosion ›
15 KV ESD protection for serial signals ›
Baudrates up to 115�2 Kbps ›
Compact size ›
Port-powered RS-232 to optical
fiber media converters
TCF-90 Series (page 12-17)
Features
RS-232 to RS-422 conversion with RTS/CTS support ›
RS-232 to 2-wire or 4-wire RS-485 conversion ›
2 KV isolation protection (TCC-100I) ›
Wall and DIN-rail mounting ›
Plug-in terminal block for easy RS-422/485 wiring ›
LED indicators for power, Tx, Rx ›
-20 to 60°C operating temperature ›
Wide temperature model available (-40 to 85°C ) ›
Industrial RS-232 to RS-422/485
converters with optional 2 KV
isolation
TCF-100/100I Series (page 12-19)
Features