User`s manual

1-2 Smartio C168H/PCI User’s Manual
configuration for IRQ and memory addresses is done automatically by the PCI BIOS,
it does not require either switches or jumpers. This means that the board must be
plugged in first before installing the driver software. For more PCI information, refer
to the Technical Reference appendix.
Operating System Support
Smartio C168H/PCI supports Windows NT, Windows 95/98, and DOS, with user-
friendly installation, configuration, and performance.
MOXA Serial Comm Tool
MOXA PComm is an easy-to-use serial communication library that runs under
Windows NT and Windows 95/98. The library comes with sample applications
developed with compilers such as Visual Basic, Visual C++, and Borland Delphi. It
contains the useful diagnostic, monitor, and terminal emulation utilities, making it
easy to develop your own applications. Furthermore, you can debug and monitor
communication status, terminal emulation, and even file transfers.
Features
v Compact board size (half-size)
v Plug and play, no switches or jumpers
v Surge/isolation protection option
v High speed 16C550C Communication Controller with on-chip hardware flow
control; no data loss, even at high transmission speeds
v Windows NT/95/98 device drivers and PComm serial comm tool
v Bus interface: 32-bit PCI
v Number of ports: 8
v I/O address: assigned by PCI BIOS
v IRQ: assigned by PCI BIOS
v Data bits: 5, 6, 7, 8
v Stop bits: 1, 1.5, 2
v Parity: none, even, odd, space, mark
v UART: 8 Í 16C550C or compatible
v Speed: 50 – 921.6 Kbps
v Connectors: 8 Í DB25/DB9, male or female
v
Data signals: RS-232－TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422－TxD+(B), TxD-(A), RxD+(B), RxD-(A), GND