User`s manual

Software Installation
Smartio C168H/PCI User’s Manual 3-27
applications, such as the PComm utility Terminal Emulator (See Serial Programming
Tools) or HyperTerminal to transmit/receive data, as well as Remote Access Service
to provide dial-up networking capabilities.
Configuring Board and Port
Follow the procedure listed below to re-configure port COM numbers for installed
boards and drivers running under Windows 95/98.
Instead of following the procedures listed below, you may also click on Start à
Program Files à MOXA Utility à Moxa Smartio/Industio Configuration Panel à
Property à Port Setting.
Since this is a PCI board, the system will automatically add or remove the board’s
configuration once the board has been added or unplugged. This saves you the
effort of adding or removing the configuration manually.
1. Open the Control Panel, click on the System icon, select the Device Manager
tab, and then choose Moxa Smartio/Industio multiport board.
2. Click on the desired C168H/PCI board entry, and then click on Properties.
3. Select the Ports Configuration tab.
4. Click on a port, and then click on Port Setting to re-assign the COM number for