User`s manual

Software Installation
Smartio C168H/PCI User’s Manual 3-21
First Time Driver Installation Stage
This stage is relevant if you are adding the first Smartio C168H/PCI board to your PC,
and are installing the driver for the first time. The installation of the Smartio
C168H/PCI board for Windows 95 and Windows 98 is slightly different, and will be
described in two separate columns. The left column is for Windows 95 and the right
column for Windows 98.
If a MOXA C168H/PCI board has previously been installed and you are adding
another board, the system will prompt you to skip to the Port Configuration Stage
discussed in the next section.
1. Upon detecting the first new Smartio C168H/PCI board, Windows 95/98 will
automatically display a New hardware found message box, after which the
following dialog boxes will pop up. Click on Next to continue.
Windows 95
2. Click on Other Locations.
Windows 98
2. Select Display a list..., then click on Next.