User`s manual

Software Installation
Smartio C168H/PCI User’s Manual 3-19
Installing the Driver
The Plug and Play feature supported by Windows 95/98 allows you to plug the
Smartio C168H/PCI board into your PC, and then get to work almost immediately with
very little installation effort. Windows 95/98 automatically detects the presence of the
new board, and prompts you to install the driver software. You will need the driver
diskette to do this.
A maximum of 4 Smartio C168H/PCI boards can be installed on one system, provided
the system’s I/O addresses and IRQ number resources are sufficient and available.
The following flow chart illustrates the driver installation stages for the Smartio
C168H/PCI boards. Each stage of the procedure will be discussed in more detail later.