User`s manual

Software Installation
Smartio C168H/PCI User’s Manual 3-17
removed, and then clicking on the Remove button.
Updating the Driver
To update the Smartio C168H/PCI driver you must first remove the exiting driver, and
then install the new driver.
1. Open Control Panel, click on the Network icon, and then select the Adapters
tab.
2. Choose MOXA Smartio/Industio Family Adapter from the Network Adapters
list.
3. Click on Remove in the Network dialog box.
4. Click on Close in the Network dialog box.
5. Restart the system.
6. To install a new driver, refer to steps 1 to 21 in the subsection First Time
Installing Driver, from the Windows NT section.
Removing the Driver
To remove the Smartio C168H/PCI board driver, you should:
1. Open Control Panel, click on the Network icon, and then select the Adapters
tab.
2. Choose MOXA Smartio/Industio Family Adapter from the Network Adapters
list.
3. Click on Remove in the Network dialog box.