User`s manual

3-12 Smartio C168H/PCI User’s Manual

Configuring Board and Port

Re-Configuring Port Settings

If the driver is already installed and you only need to re-configure the ports, either

click on Start è Program Files è MOXA Utility è Moxa Smartio/Industio

Configuration Panel è Property, or follow steps 1–5 listed below, and then refer to

steps 11–18 from the previous subsection.

1. From the Windows NT desktop, click on Start

Control Panel to open the

Control Panel.

2. Click on the Network icon (shown highlighted in the figure below).

3. Select MOXA Smartio/Industio Family Adapter from the list on the Adapters

page, and then click on Properties… .