User`s manual

Introduction
Smartio C168H/PCI User’s Manual 1-5
Installation Guide
This section gives a brief summary of how to install Smartio C168H/PCI for each
supported operating system. Installation is simple and involves the following stages:
Check PCI BIOS settings.
Install Smartio C168H/PCI board See chapter 2, Hardware
and connection option (cable/box) Installation
Install software from diskette See the respective OS section
and configure driver for board and ports from chapter 3, Software
Installation
Connect cables to the devices See chapter 5, Connection
Option (Opt8x) and Cable
Wiring for cable wiring specs
Restart system. See chapter 3, Software
Check the driver initialization status. Installation
If system restart is successful, you may
develop or execute desired applications. See chapter 4, Serial
Programming Tools