User's Manual

6-12 Moxa Internet Sharer User’s Manual
Manually Configuring your TCP/IP
If you already have an existing LAN and you would like to add another
PC to work with both your TCP/IP server on your LAN and Internet
Sharer, you need to set your TCP/IP manually without using DHCP.
1. Right click Network Neighborhood and select Properties. Choose
Protocol.
2. Choose TCP/IP then click on Properties.
3. Select the network card using for connecting Internet Sharer.
4. Choose configure IP address.
5. Enter your IP address and subnet mask as assigned by your LAN
administrator.
6. Go to DNS dialog. Enter your DNS you get from your ISP. You
may just leave it blank if you don t have this address.
7. Go to Gateway dialog. Enter the Internet Sharer IP address to the
gateway box.