User's Manual

Configuring Your Windows 95 or Windows NT 6-11
Configuring Windows NT TCP/IP as DHCP client
Using DHCP
It is recommended that you use the Internet Sharer DHCP service for
assigning your PC to work unless you have an existing LAN and some
specific IP addresses are needed. The DHCP server eases you the
trouble for setting dedicated IP address, Gateway and Domain Name
Server. You may follow the steps below to set your system using
automatic assigned IP address:
1. Right click Network Neighborhood and select Properties. Choose
Protocol.
2. Choose TCP/IP then click on Properties.
3. Select the network card using for connecting Internet Sharer.
4. Check Enable Automating DHCP Configuration.
5. You may setup the DNS address if you get the DNS address from
your ISP. You may just leave it blank if you don t have this address.