User's Manual

Advanced Configuration 5-9
How to Create a login script
1. From the Internet Sharer Manager, click Configure.
2. Click Advanced to continue.
3. Click on the folder instruction for Login Script.
4. If you have a command to wait for, type in the command under the
wait column.
5. If you have a command to send, you may type in your command or
scroll down to select sending USERNAME or PASSWORD.
6. Click ‘ Add’ to add this set of commands to the script.
Example:
You have applied for your Internet service and your ISP instructs you
to log in and select 1 for PPP connection. While using manually log in,
it looks like:
username: john
password : john’s password
Welcome to Moxa Terminal Server
1) PPP
2) Terminal
===è 2
Steps for creating the script:
1. Under the Wait-For text box, type in
2. Under the Send text box, scroll down to select USERNAME.
3. Click ADD to add this sets of commands.
4. Follow the same rule to add ‘ password’ .
5. Under the Wait-For text box, type in then click ADD to end.