User's Manual

ConnectingThe Internet Sharer and Equipment 4-5
5. The following two steps are only required if no one has ever set up
the Internet Sharer before. If you are the first one to install Internet
Sharer software at your office, you have to type in the basic
information to the Internet Sharer so it contains your ISP
information to dial out. Refer to the worksheet you entered in
Chapter 2 and copy the Username and Password to the
corresponding fields. Type the password again then click Next.
4 Note : If you do not see this dialog box but jump to dialog
instead, it means the Internet Sharer has already got the
basic ISP information inside. If you like to make any change,
simply start the Internet Sharer Manger to re-configure.
Later in this chapter describes how to start Internet Sharer
Manager.