User's Manual

2-2 Moxa Internet Sharer User’s Manual
What do you need before installation?
You need one computer running Microsoft Windows 95 or Windows
NT 4.0 to configure the Internet Sharer. The Setup Wizard program on
the disk installs the Internet Sharer Manager and a Monitor utility to
your Computer. You may install the Setup program to all Computers on
the LAN to ease the configuration of networking and install the
monitor utility to every computer.
Check with the equipment you have before you start installing Internet
Sharer. Below lists the equipment needed for typical dial-up Internet
connection.
§ Internet Service Provider (ISP) dial-up account - only one account is
needed
§ Modem or ISDN terminal adapter
§ RS232 Cable for Modem (DB9 male or DB25 male) to Internet Sharer
(DB9 female). Usually you can get this cable from your modem
package.
§ One dedicated phone line or ISDN line
§ Ethernet cards for your Computers
§ RJ45 to RJ45 cables to connect your LAN cards 10BaseT interface to
Internet Sharer
§ At least one computer running Windows 95 or Windows NT
4 Note : There are more connection methods supported by Internet
Sharer. They are leased line and direct link. Please refer to
Chapter 4 Link Connection Type under Basic Configuration.