User`s manual

MGate MB3000 User’s Manual Configuring the Modbus Gateway
9-13
Configure Serial Communication Parameters
The Serial tab is where each serial port’s communication parameters are configured. You can
configure Baud Rate, Parity, Stop Bit, Flow Control, FIFO, and Interface Mode.
Parameter Value
RS-232
RS-422
RS-485, 2W
Interface Mode
RS-485, 4W
Baud Rate 50 bps to 961200 bps
Parity None, Odd, Even, Space, Mark
Stop Bits 1, 2
Flow Control None, Xon/Xoff, RTS/CTS
UART FIFO Enable, Disable