User`s manual

MGate MB3000 User’s Manual Configuring the Modbus Gateway
9-11
Configure IP Address and Other Network Settings
The Network tab is where the unit’s network settings are configured. You can modify the Name,
Network Configuration, IP Address, Netmask, Default Gateway, and DNS. You may also
select a Password to protect the unit from unauthorized access.
Parameter Value Notes
Name (an alphanumeric string)
You can enter a name to help you identify
the unit, such as the location, function,
etc.
Network Configuration
Static IP, DHCP, BootP, or
DHCP/BootP
Select “Static IP” if you are using a fixed
IP address. Select one of the other options
if the IP address is set dynamically.
IP Address
192.168.127.254
(or other 32-bit number)
The IP (Internet Protocol) address
identifies the server on the TCP/IP
network.
Netmask
255.255.255.0
(or other 32-bit number)
This identifies the server as belonging to
a Class A, B, or C network.
Gateway
0.0.0.0
(or other 32-bit number)
This is the IP address of the router that
provides network access outside the
server’s LAN.
DNS1
0.0.0.0
(or other 32-bit number)
This is the IP address of the primary
domain name server.
DNS2
0.0.0.0
(or other 32-bit number)
This is the IP address of the secondary
domain name server.