User`s manual

MGate MB3000 User’s Manual Configuring the Modbus Gateway
9-8
Specify by IP Address
Click Specify by IP Address if you know the IP address of the unit and wish to connect to it directly.
A dialog box will appear. Enter the unit’s IP address and click OK.
If the search is successful, the unit will be listed in MGate Manager. Click the unit to begin
configuration.
ATTENTION
If Search by IP Address fails to locate the MGate MB3000, the IP address that you entered might
be incorrect. Try doing the search again and re-entering the IP address carefully.
Another possibility is that the MGate MB3000 is located on the same LAN as your PC, but on a
different subnet. In this case, you can modify your PC’s IP address and/or netmask so that it is on
the same subnet as the MGate MB3000. After your PC and the MGate MB3000 are on the same
subnet, MGate Manager should be able to find the unit.