User`s manual

MGate MB3000 User’s Manual Configuring the Modbus Gateway
9-7
Connecting to the Unit
MGate Manager needs to connect to the unit before the unit can be configured. There are two
methods to connect to the unit. Broadcast Search is used to find every MGate MB3000 on the LAN.
Search by IP attempts to connect to a specific unit by IP address, which is useful if the unit is
located outside the LAN or can only be accessed by going through a router.
Broadcast Search
Click Broadcast Search to begin searching the LAN for all MGate MB3000 units.
When the search is complete, every MGate MB3000 that is found on the LAN will appear in the
window with MAC address and IP address. Simply select the one that you wish to configure.