User`s manual

MGate MB3000 User’s Manual Configuring the Modbus Gateway
9-6
Change Language Setting
If you wish to run MGate Manager in a different language, you may click Language to change the
language setting. A dialog box showing the available languages should appear as shown below.
When you click OK, MGate Manager will immediately reflect your chosen language.
ATTENTION
Use “Default Language” before contacting MOXA Technical Support.
With support for multiple languages, MGate Manager is more user-friendly and accessible.
However, if you need assistance from MOXA Technical Support, please change the language to
“Default Language”. This will prevent any misunderstandings or confusion about MGate Manager
menu items and commands as our engineers assist you.
The default language is English and will only be active for the current MGate Manager session.
When you open MGate Manager again, the language will revert to your original setting.