Specifications

4-24
www.moxa.com
[e-mail]
MGate™ 5106-DNMB-GSM/ 5207-DNMB-HSPA Series
4
Industrial Ethernet Gateways
Industrial Ethernet Gateways >
Overview
Robust Maintenance Functions
Advanced Power Management
MGate™ 5106-DNMB-GSM/
5207-DNMB-HSPA Series
1 and 2-port Modbus and DNP3 to cellular VPN gateways
The MGate 5106-DNMB-GSM/5207-DNMB-HSPA series gateway
provides a communication portal between remote Modbus/DNP3
devices and the central SCADA system through cellular networks. Each
model has a rugged metallic casing, DIN-rail mounting, and optional
built-in optical isolation. To secure data transmissions, the MGate
The MGate 5106-DNMB-GSM/5207-DNMB-HSPA series gateway can
be easily configured by web console or Telnet console for remote
maintenance. Each model also supports encryption commutation,
such as HTTPS and SSH, to prevent security issues. In addition, log
5106-DNMB-GSM/5207-DNMB-HSPA series gateway also provides
a VPN tunnel function. Morever, the rugged design is particularly
suited for industrial applications, such as oil and gas, power, process
automation, and factory automation.
functions, such as Modbus/DNP3 and cellular connection events,
are provided in the firmware to make maintenance easier. Moreover,
users can remotely review log data through the web console when
connection is lost.
The MGate 5106-DNMB-GSM/5207-DNMB-HSPA series gateway can
be used to retrieve data from remote Modbus/DNP3 devices. However,
supporting remote cellular communications also requires cellular
gateways to consume additional power. For instance, cellular gateways
deployed at remote sites may only have a battery to store solar power,
resulting in a very limited power supply. So in order to conserve as
› Retrieve Modbus/DNP3 serial data through cellular networks
› Dual SIM card slots for communication redundancy
› VPN tunnel function to secure data transmission
› Advanced power management to meet restricted outdoor
environment requirements
› microSD card for conguration backup
› -40 to 75°C wide operating temperature models available
› 2 digital inputs and 2 digital outputs
much power as possible, the MGate 5106-DNMB-GSM/5207-DNMB-
HSPA series gateway can automatically turn off unused components
and run on very low power if there is no cellular transmission in
progress. This advanced power management system makes the MGate
5106-DNMB-GSM/5207-DNMB-HSPA ideal for remote device access.
Specifications
Ethernet Interface
Protocol: Modbus TCP, DNP3
Number of Ports:
1 for MGate 5106-DNMB-GSM,
2 (1 IP, Ethernet cascade) for MGate 5207-DNMB-HSPA
Speed: 10/100 Mbps, Auto MDI/MDIX
Connector: 8-pin RJ45
Magnetic Isolation Protection: 1.5 kV (built-in)
Serial Interface
Protocol: Modbus RTU/ASCII Master/Slave, DNP3 serial
Number of Ports:
1 for MGate 5106-DNMB-GSM,
2 for MGate 5207-DNMB-HSPA
Serial Standards: RS-232/422/485, software selectable
Connectors: DB9 male
Serial Communication Parameters
Data Bits: 5, 6, 7, 8
Stop Bits: 1, 1.5, 2
Parity: None, Even, Odd, Space, Mark
Flow Control: RTS/CTS, RTS Toggle
Baudrate: 50 to 921.6 Kbps
Serial Signals
RS-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422: Tx+, Tx-, Rx+, Rx-, GND
RS-485-4w: Tx+, Tx-, Rx+, Rx-, GND
RS-485-2w: Data+, Data-, GND
Wireless Network
MGate 5106-DNMB-GSM: 2.5 G
GSM/GPRS: 850/900/1800/1900 MHz
Class: GPRS 10