Specifications

4-22
www.moxa.com
[e-mail]
MGate™ 5105-MB-EIP Series
4
Industrial Ethernet Gateways
Industrial Ethernet Gateways >
Overview
Redundant Power Inputs
Effortless Conguration and Troubleshooting via Web Console
Conguration Backup via microSD Card
Specifications
MGate™ 5105-MB-EIP Series
1-port Modbus RTU/ASCII/TCP-to-EtherNet/IP gateways
The MGate 5105-MB-EIP is an industrial Ethernet gateway for Modbus
RTU/ASCII/TCP and EtherNet/IP network communication. To integrate
existing Modbus devices onto an EtherNet/IP network, use the
MGate 5105-MB-EIP as a Modbus master or slave to collect data and
The MGate 5105-MB-EIP also provides a web console to make
configuration easy without having to install an extra utility. Simply log
in as an administrator to access all settings, or as a general user with
read-only permission. Besides configuring basic protocol settings, you
can use the web console to monitor I/O data values and transfers. In
exchange data with EtherNet/IP devices. The latest exchange data will
be stored in the gateway as well. The gateway converts stored Modbus
data into EtherNet/IP packets so the EtherNet/IP scanner can control or
monitor Modbus devices.
particular, I/O Data Mapping shows data addresses for both protocols
in the gateway’s memory and I/O Data View allows you to track data
values for online nodes. Moreover, diagnostics and communication
analysis for each protocol can also provide helpful information for
troubleshooting.
The MGate 5105-MB-EIP has dual power inputs for greater reliability.
The power inputs allow simultaneous connections to two live DC
power sources, so that continuous operation is provided even if one
power source fails. The higher level of reliability makes these advanced
Modbus-to-EtherNet/IP gateways ideal for demanding industrial
applications.
The MGate 5105-MB-EIP is equipped with a microSD card slot. A
microSD card can be used to back up both the system configuration
and system log, and can be used to conveniently copy the same
› Support for both EtherNet/IP adapter and scanner
› Effortless conguration via web or Windows utility
› Complete packet analysis and diagnosis information for
maintenance
› Easy I/O data maintenance via web interface
› microSD card for conguration and system log backup
› -40 to 75°C wide operating temperature models available
› Modbus port with 2 kV built-in isolation protection
› Built-in Ethernet cascading for easy wiring
configuration to several MGate 5105-MP-EIP units. The configuration
file stored in the microSD card will be copied to the MGate itself when
the system is rebooted.
Ethernet Interface
Protocol: EtherNet/IP, Modbus TCP
Number of Ports: 2 (1 IP, Ethernet cascade)
Speed: 10/100 Mbps, Auto MDI/MDIX
Connector: 8-pin RJ45
Magnetic Isolation Protection: 1.5 kV (built-in)
EtherNet/IP
• Class:Adapter,Scanner
• CIPObjectsSupported:Identity,MessageRouter,Assembly,
Connection Manager, TCP/IP interface, Ethernet link, Port
• Max.NumberofConnections:
MGate as Adapter: 16 connections for read-only, 1 connection for
read/write
MGate as Scanner: 100 connections
•Max.TotalI/ODataSize:
Input: 2048 bytes (496 bytes per connection)
Output: 2048 bytes (496 bytes per connection)
Modbus
• FunctionsSupported:1,2,3,4,5,6,15,16,23
• Max.NumberofCommands:100
• Max.NumberofConnections:
MGate as Modbus TCP Master: 32 connections
MGate as Modbus TCP Slave: 16 connections
• Max.TotalI/ODataSize:
Input: 2048 bytes
Output: 2048 bytes