Industrial Ethernet Gateways Product Selection Guide Industrial Ethernet Gateways �����������������������������������������������������������������������������������������������������������������������������������4-2 Industrial Ethernet Gateways (Wireless) �����������������������������������������������������������������������������������������������������������������4-4 Ethernet Fieldbus Gateways Introduction to Industrial Ethernet Gateways �����������������������������������������������������������������
Industrial Ethernet Gateways Industrial Ethernet Gateways MGate MB3180 MGate MB3280 MGate MB3170 (-IEX) MGate MB3170-T (-IEX) MGate MB3170I (-IEX) MGate MB3170I-T (-IEX) MGate MB3480 MGate MB3270 (-IEX) MGate MB3270-T (-IEX) MGate MB3270I (-IEX) MGate MB3270I-T (-IEX) MGate EIP3170 (-IEX) MGate EIP3170-T (-IEX) MGate EIP3170I (-IEX) MGate EIP3170I-T (-IEX) MGate EIP3270 (-IEX) MGate EIP3270-T (-IEX) MGate EIP3270I (-IEX) Ethernet Interface 4 Protocol Number of Ports Speed Connector Magnetic Isolat
Industrial Ethernet Industrial Ethernet Gateways MGate 4101-MB-PBS MGate 4101-MB-PBS-T MGate 4101I-MB-PBS MGate 4101I-MB-PBS-T MGate 5101-PBM-MN MGate 5101-PBM-MN-T MGate 5102-PBM-PN MGate 5102-PBM-PN-T MGate 5105-MB-EIP MGate 5105-MB-EIP-T – – – – – Modbus TCP 1 RJ45 1.
Industrial Ethernet Gateways Industrial Ethernet Gateways (Wireless) MGate 5106-DNMB-GSM MGate 5106-DNMB-GSM-T MGate 5207-DNMB-HSPA MGate 5207-DNMB-HSPA-T Ethernet Interface 4 Protocol Number of Ports Connectors Magnetic Isolation Protection Speed Modbus TCP, DNP3 IP 1 RJ45 1.
Industrial Ethernet Introduction to Industrial Ethernet Gateways Get Integrated—It’s Quick, Easy, and Reliable Innovative and Easy-to-Use Industrial Gateways Create Seamless Connections and Compatibility The need for industrial Ethernet gateway solutions is not only driven by the increasing demand for connecting industrial Ethernet protocols (such as EtherNet/IP, Modbus TCP, or PROFINET) to existing fieldbus networks, but by maximizing efficiency as well.
Industrial Ethernet Gateways QuickLink AutoLearning and AutoMapping Intelligence for Connecting Modbus to PROFIBUS QuickLink, an innovative Moxa technology, simplifies the configuration of gateways to enable seamless connections between Modbus and PROFIBUS communications. QuickLink supports intelligent AutoLearning and AutoMapping, and replaces traditional methods of gateway configuration that are tedious and time-consuming.
Industrial Ethernet Applications Oil Pipeline Monitoring Modbus RTU/ASCII to Modbus TCP (cellular network) DNP3 Serial to DNP3 IP (cellular network) Pipeline networks can stretch for hundreds of miles. To decrease the risk of explosions and leakage, a reliable remote monitoring system that includes meters and PLCs to manage onsite operations is an absolute must. As a result, many systems now use a cellular network to transmit Modbus RTU data from field devices back to the SCADA Modbus TCP network.
Industrial Ethernet Gateways MGate™ MB3180/3280/3480 1, 2, and 4-port standard serial-to-Ethernet Modbus gateways ››Convert between Modbus TCP and Modbus RTU/ASCII ››1 Ethernet port and 1, 2, or 4 RS-232/422/485 ports ››16 simultaneous TCP masters with up to 32 simultaneous requests per master ››Easy hardware setup and configuration 4 Industrial Ethernet Gateways > MGate™ MB3180/3280/3480 Overview The MB3180, MB3280, and MB3480 are standard Modbus gateways that convert between Modbus TCP and Modbus RTU/
Industrial Ethernet Standards and Certifications Dimensions: Without ears: MB3180: 22 x 52 x 80 mm (0.87 x 2.05 x 3.15 in) MB3280: 22 x 77 x 111 mm (0.87 x 3.03 x 4.37 in) MB3480: 35.5 x 102.7 x 157.2 mm (1.40 x 4.04 x 6.19 in) With ears: MB3180: 22 x 75 x 80 mm (0.87 x 2.95 x 3.15 in) MB3280: 22 x 100 x 111 mm (0.87 x 3.94 x 4.37 in) MB3480: 35.5 x 102.7 x 181.3 mm (1.40 x 4.04 x 7.
Industrial Ethernet Gateways MGate™ MB3170/3270 1 and 2-port advanced serial-to-Ethernet Modbus gateways ››Configuration is exceptionally easy ››Slave mode supports 16 TCP masters and up to 31 or 62 serial slaves at the same time ››Master mode supports 32 TCP slaves at the same time ››Emergency request tunnels ensure QoS control ››Serial redirector function provided ››Embedded Modbus protocol analyzer ››Redundant dual DC power inputs ››Built-in Ethernet cascading for easy wiring 4 Industrial Ethernet Gat
Industrial Ethernet Priority Control for Urgent Commands (Patented) As Modbus networks increase in size and complexity, the lag time between commands and responses becomes a major concern. Advanced models of the MB3000 series provide a priority control function for urgent commands, allowing users to force certain commands to get an immediate response. Depending on your system’s requirements, different methods are available to define which commands receive priority.
Industrial Ethernet Gateways Dimensions Unit: mm (inch) Top View 20.6 (0.81) 29.91 (1.18) Front View Rear View 29 (1.14) 14.5 (0.57) 14.5 (0.57) MGate™ MB3170 89.2 (3.51) 9.2 (0.36) 7.2 (0.28) 69.5 (2.74) Industrial Ethernet Gateways > MGate™ MB3170/3270 118.5 (4.67) 25.9 (1.02) 124.5 (4.9) 7.2 (0.28) 7.1 (0.28) 20 (0.79) 4 7.1 (0.28) 35 (1.38) MGate™ MB3270 25.9 (1.02) Side View 35 (1.
Industrial Ethernet MGate™ EIP3000 Series 1 and 2-port EtherNet/IP-to-DF1 gateways ››PCCC objects for Rockwell Automation networks supported ››Use ProCOM to implement control via COM port mapping ››8 simultaneous EtherNet/IP client/server pairs with up to 16 queued requests ››Serial redirector keeps the original serial master and slave connection while connecting devices to the Ethernet ››EtherNet/IP and DF1 protocol analyzer for easy troubleshooting ››Redundant dual DC power inputs ››Built-in Ethernet ca
Industrial Ethernet Gateways Serial Redirector Function Maintains Original Master/Slave Connections The serial redirector function allows the commands of a serial master (command initiator) to be redirected to the serial slave (command executor) on another port. In addition, a serial master can operate simultaneously with EtherNet/IP masters without changing the DF1 architecture or software.
Industrial Ethernet Reliability Warranty Warranty Period: 5 years Details: See www.moxa.com/warranty MTBF (mean time between failures): MGate EIP3170: 210,794 hrs MGate EIP3270: 125,234 hrs Dimensions Unit: mm (inch) EIP3170/EIP3270 Top View 20.6 (0.81) 29.91 (1.18) Front View Rear View 29 (1.14) 14.5 (0.57) 14.5 (0.57) MGate™ EIP3170 89.2 (3.51) 9.2 (0.36) 4 7.2 (0.28) 118.5 (4.67) 124.5 (4.9) 20 (0.79) 25.9 (1.02) 35 (1.38) MGate™ EIP3270 25.9 (1.02) Side View 35 (1.
Industrial Ethernet Gateways MGate™ 4101-MB-PBS Series 1-port Modbus RTU/ASCII-to-PROFIBUS slave gateways ››Protocol conversion between Modbus and PROFIBUS ››Windows utilities with innovative QuickLink function for automatic configuration within minutes ››Redundant dual DC power inputs and relay output supported ››Embedded data packet analyzer ››Powerful and visual diagnostic tool ››-40 to 75°C wide operating temperature models available 4 Industrial Ethernet Gateways > MGate™ 4101-MB-PBS Series Overvie
Industrial Ethernet Serial Signals Power Consumption: MGate 4101-MB-PBS: 340 mA @ 12 VDC, 130 mA @ 48 VDC MGate 4101I-MB-PBS: 375 mA @ 12 VDC, 140 mA @ 48 VDC RS-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND RS-422: Tx+, Tx-, Rx+, Rx-, GND RS-485-4w: Tx+, Tx-, Rx+, Rx-, GND RS-485-2w: Data+, Data-, GND Standards and Certifications Configuration Options: Serial Console, Windows Utility Utilities: MGate Manager for Windows 2000/XP/2003/Vista/Server 2008/7/8 (x86/x64), Windows Server 2008 R2/2012 (x64) Supp
Industrial Ethernet Gateways MGate™ 5101-PBM-MN Series 1-port PROFIBUS-to-Modbus TCP gateways ››Protocol conversion between PROFIBUS and Modbus TCP ››Automatic scan of PROFIBUS devices for easy configuration ››Redundant dual DC power inputs and relay output supported ››Embedded data packet analyzer and diagnostic tool ››Web-based GUI for I/O data visualization ››-40 to 75°C wide operating temperature models available 4 Industrial Ethernet Gateways > MGate™ 5101-PBM-MN Series Overview The MGate 5101-PBM-
Industrial Ethernet Power Requirements Data Rate: 9600 bps to 12 Mbps Connector: DB9 female Isolation: 2 kV (built-in) Input Voltage: 12 to 48 VDC Power Connector: Terminal block Power Consumption: 365 mA @ 12 VDC Serial Signals (Serial Console) Standards and Certifications RS-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND Software Physical Characteristics Housing: Metal, IP30 protection Weight: 500 g Dimensions: 36 x 105 x 140 mm (1.42 x 4.14 x 5.
Industrial Ethernet Gateways MGate™ 5102-PBM-PN Series 1-port PROFIBUS-to-PROFINET gateways ››Protocol conversion between PROFIBUS and PROFINET ››Automatic scan of PROFIBUS devices, and easy configuration ››microSD card for configuration backup ››Built-in Ethernet cascading for easy wiring ››Redundant dual DC power inputs and relay output supported ››Embedded I/O monitoring and diagnostic tools ››Web-based GUI for I/O data visualization ››-40 to 75°C wide operating temperature models available 4 Industri
Industrial Ethernet Power Requirements Serial Signals (Serial Console) Input Voltage: 12 to 48 VDC Power Connector: Terminal block Power Consumption: 430 mA @ 12 VDC Connector: 8-pin RJ45 RS-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND Software Configuration Options: Windows Utility, Serial Console, Web Console (HTTP/HTTPS), Telnet/SSH Console Utilities: MGate Manager for Windows 2000/XP/2003/Vista/Server 2008/7/8 (x86/x64), Windows Server 2008 R2/2012 (x64) Support: AutoScan, MXview, SNMP (v1, v2, v3)
Industrial Ethernet Gateways MGate™ 5105-MB-EIP Series 1-port Modbus RTU/ASCII/TCP-to-EtherNet/IP gateways ››Support for both EtherNet/IP adapter and scanner ››Effortless configuration via web or Windows utility ››Complete packet analysis and diagnosis information for maintenance ››Easy I/O data maintenance via web interface ››microSD card for configuration and system log backup ››-40 to 75°C wide operating temperature models available ››Modbus port with 2 kV built-in isolation protection ››Built-in Ether
Industrial Ethernet Serial Interface Environmental Limits Protocol: Modbus RTU/ASCII Number of Ports: 1 Serial Standards: RS-232/422/485, software selectable Connectors: DB9 male Isolation: 2 kV (built-in) RS-485 Data Direction Control: ADDC® (automatic data direction control) Pull High/Low Resistor for RS-485: 1 kΩ, 150 kΩ Terminator for RS-485: 120 Ω Data Bits: 5, 6, 7, 8 Stop Bits: 1, 1.5, 2 Parity: None, Even, Odd, Space, Mark Flow Control: RTS/CTS, RTS Toggle Baudrate: 50 bps to 921.
Industrial Ethernet Gateways MGate™ 5106-DNMB-GSM/ 5207-DNMB-HSPA Series 1 and 2-port Modbus and DNP3 to cellular VPN gateways ››Retrieve Modbus/DNP3 serial data through cellular networks ››Dual SIM card slots for communication redundancy ››VPN tunnel function to secure data transmission ››Advanced power management to meet restricted outdoor environment requirements ››microSD card for configuration backup ››-40 to 75°C wide operating temperature models available ››2 digital inputs and 2 digital outputs 4
Industrial Ethernet Environmental Limits MGate 5207-DNMB-HSPA: 3.75 G GSM/GPRS/EDGE: 850/900/1800/1900 MHz, UMTS/HSPA: 850/900/1700/1900/2100 MHz, AWS: 1700/2100 MHz Class: GSM: 4 (850/900), 1 (1800/1900), EDGE: E2, WCDMA: 3 Number of SIM Card Slots: 1 for MGate 5106-DNMB-GSM, 2 for MGate 5207-DNMB-HSPA Number of Antennas: 1 for MGate 5106-DNMB-GSM, 2 for MGate 5207-DNMB-HSPA Operating Temperature: Standard Models: 0 to 60°C (32 to 140°F) Wide Temp.
Industrial Ethernet Gateways Dimensions Unit: mm (inch) 8.2 MGate™ MGate™ 5106-DNMB-GSM 5207-DNMB-HSPA MGate™ MGate™ 5106-DNMB-GSM 5207-DNMB-HSPA PWR Ready PWR Ready P1 SIM P1 P2 SIM1 SIM2 RF 10M 100M 100M Ethernet Ethernet2 10M Ethernet1 100M 10M 134.8 COM DI GND DO P1 P1 P2 4 5207-DNMB-HSPA 5106-DNMB-GSM Industrial Ethernet Gateways > MGate™ 5106-DNMB-GSM/ 5207-DNMB-HSPA Series 4-26 COM DI0 DI1 GND DO0 DO1 Ø10 RF 45.8 8.6 Top View Front View 105 8.