User`s manual

MGate MB3000 User’s Manual Configuring the Modbus Gateway
4-13
ATTENTION
Please note the following regarding automatic calibration of response timeouts:
y When automatically detecting the response timeout, the MGate will use the ID table in the
SID Map tab to determine which ports and which IDs to search. Make sure that you have
defined the ID table for your system before clicking “Auto Detection”.
y The automatic calibration will take some time to complete. We recommend that you save
this step for last and take a break as the MGate does its work.
Verifying Location of Unit
If you are managing multiple MGate units, you may wonder if you are configuring the correct unit
in MGate Manager. You can select a unit in MGate Manager and click Locate to make that unit’s
“Ready” LED blink for a few seconds. This will tell you which physical unit corresponds with the
unit that you selected.