User`s manual

MGate MB3000 User’s Manual Configuring the Modbus Gateway
4-6
Mode Description
RTU Slave
Modbus RTU slave(s) will be connected to the
serial port, to be controlled by Modbus TCP
masters.
RTU Master
A Modbus RTU master will be connected to the
serial port and will control Modbus TCP slaves.
ASCII Slave
Modbus ASCII slave(s) will be connected to the
serial port, to be controlled by Modbus TCP
masters.
ASCII Master
A Modbus ASCII master will be connected to the
serial port and will control Modbus TCP slaves.
Use the radio buttons to select the desired operation mode for each serial port on the Modbus
gateway.
Configure IP Address and Other Network Settings
The Network tab is where the unit’s network settings are configured. You can modify the Name,
Network Configuration, IP Address, Netmask, Default Gateway, and DNS. You may also
select a Password to protect the unit from unauthorized access.